JVC C11U Instruction Manual - Page 10

10

(Side and rear views)

Controls, Connectors and Indicators (continued)

Introduction

9

Ventilation opening

For the internal cooling fan.

Install the cam-

era in a way that does not cover the opening.

0

[RESET] button

Press this button to reset VN-C11.

If this but-

ton is held down for 2 seconds or longer, the

values set with [V.Networks Setup Tool] re-

turn to those set at the factory, and VN-C11

restarts.

!

[IRIS] terminal

For connecting with a DC IRIS lens.

(A video iris lens cannot be connected.)

@

[POWER] indicator

This indicator starts blinking when the power

is turned on.

When the camera is ready for

network connection, this becomes steady on.

If the indicator blinks while the camera is in

use, check the camera and/or the network

equipment.

#

[DC 12 V/AC 24 V] Power terminal

For connecting to a DC 12 V or AC 24 V, 50 Hz/

60 Hz, power source. (

☞

Page 14)

$

[ALARM INPUT] terminals

For connecting with an external alarm equip-

ment. (

☞

Page 16)

%

[ALARM OUTPUT] terminals

For connecting with an external alarm equip-

ment. (

☞

Page 16)

^

[10 BASE-T/100 BASE-TX]

For network connection with a LAN cable.

(

☞

Page 15)

&

[MONITOR OUT] terminal

For connecting to monitor TV when deciding

camera angles.

RESET

IRIS

0

9

!

CLASS

2

ONLY

For

USA

ISOLATED

POWER

ONLY

For EUROPE

POWER

MONITOR OUT

10BASE-T/100BASE-TX

For USA

DO NOT CONNECT TO THE

TELEPHONE NETWORK

G

2

2

1

1

OUT COM

ALARM

DC12V

AC24V

OUTPUT

INPUT

PUSH

#

@

$

%

^

&

Caution

For angle adjustment only, problems such

as noise may occur if connected with a

switcher.

Section	Page
Cover	1
IMPORTANT SAFEGUARDS	2
Safety Precautions	3
Introduction	4
Contents	4
Features	6
Items Included	6
Required Operating Environment	7
Upgrading the Application	7
Operating Precautions	8
Controls, Connectors and Indicators	9
Preparations	11
Connection Examples	11
Preparation Procedure	12
Step 1 Connection and Installation	13
1-1 Attaching a Lens	13
1-2 Connecting the Power Cord	14
1-3 Connecting a LAN Cable	15
1-4 Connecting the Alarm I/O Terminals	16
1-5 Installing the Camera	18
Step 2 Setting the Network	19
2-1 Installing the Software	19
2-2 Setting the PC’s IP Address for Windows XP	20
2-2 Setting the PC’s IP Address for Windows 2000	22
2-3 Setting the IP Address for VN-C11 with V.Networks Setup Tool	24
2-4 Other Settings with V.Networks Setup Tool	26
1. Password Setting	27
2. Alarm Setting	28
3. Motion Detection Setting	30
4. Recording Setting	32
5. FTP Client Setting	34
6. Multicast	36
7. Compression Format	38
8. Memory Capacity	38
9. Web	39
10. FTP Server	40
11. Time Setting	41
2-5 Registering the Connected Camera with V.Networks Controller	42
Step 3 Adjusting the Camera	43
3-1 Back-focus Adjustment	43
Operations (V.Networks Controller)	44
Step 4 Setting with V.Networks Controller	44
4-1 Starting Up V.Networks Controller	44
4-2 Function Settings with V.Networks Controller	45
4-3 Motion Detection Standby	46
4-4 Image Size and Inversion	47
4-5 Setting the Image Quality	48
4-6 Frame Rate	50
4-7 Alarm Setting	51
4-8 Time Stamp	53
4-9 Changing the Registered Information	54
Step 5 Operations with V.Networks Controller	55
5-1 Operations with V.Networks Controller	55
5-2 Record/Stop	56
5-3 Playback	57
5-4 Other Instructions on Record and Playback	59
5-5 Snapshot	60
Operations (Web Browser)	61
Step 6 Operations with a Web Browser	61
6-1 Required Operating Environment	61
6-2 Access Authorization	62
6-3 Starting Up the Web Browser	63
6-4 Settings with a Web Browser	64
1. Other Settings	65
2. Image Settings	68
3. View Settings	69
4. Alarm Settings	70
5. FTP Settings	71
6-5 Viewing Still Images	73
6-6 Viewing Moving Images	74
6-7 VN-C11 Image Link	75
Others	76
Troubleshooting	76
Specifications	77
External Dimensions	77

JVC C11U Instruction Manual - Page 10

Side and rear views, DC 12 V/AC 24 V] Power terminal

Page 10 highlights