JVC C11U Instruction Manual - Page 12
Preparation Procedure, Step 6 Operations with a Web Browser
UPC - 046838325670
View all JVC C11U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Preparations Preparation Procedure Set the camera in the following procedure. Step 1 Connection and Installation Attach a lens and connect the power cable, a LAN cable and an alarm etc. Then, install the camera to a fixer, etc. Fix a wire securely for preventing the camera from falling off. After installing the camera, connect the MONITOR OUT terminal located on the rear panel to the monitor TV and adjust the camera angle. (For back-focus adjustment, ☞ page 43) ☞ Page 13 Step 2 Setting the Network Install the software [V.Networks Controller], and set the network for the PC and VN-C11. Also perform the setting with [V.Networks Setup Tool] and registration of the connected camera with [V.Networks Controller]. ☞ Page 19 ❈ If multiple PCs are in use, first turn on the power for one PC and proceed to 2-4 Other Settings with V.Networks Setup Tool. Only then, turn on the power to a sec- ond PC and go on to 2-4. Repeat the procedure for other PCs. (☞ Page 14) Step 3 Adjusting the Camera Adjust the back-focus while checking images. ☞ Page 43 Step 4 Setting with V.Networks Controller Set image quality and alarm, etc. by using [V.Networks Controller] which has been installed. ☞ Page 44 Step 5 Operations with V.Networks Controller Now the camera is ready for recording and playback, etc. with [V.Networks Controller]. ☞ Page 55 Step 6 Operations with a Web Browser The camera is ready for Web operations. 12 ☞ Page 61