JVC C11U Instruction Manual - Page 25

For other settings, next Confirm the settings., Click, Start up [V.Networks Controller].

Get JVC C11U - VN Network Camera PDF manuals and user guides
UPC - 046838325670
View all JVC C11U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

2-3 Setting the IP Address for VN-C11 with V.Networks Setup Tool (continued) 2. Confirm the settings. Select whether to use DHCP. Note ● With DHCP selected, the IP ad- dress of the DHCP server etc. can be checked. Change the IP address to the one alloted, or approved, by the network administrator. For other settings, ☞ next page 3. Click . Set the subnet mask to an appropriate value according to the operating environment. Ask the network administrator if necessary. Click . [V.Networks ID] works as an identification code set to VN-C11. Only alphanumeric characters can be used. This ID does not directly affect the operation by the user. Normally, the ID should be set as "CAM00001," "CAM00002" etc. (0 to 8 characters) Click to update the values. Note A new IP address becomes effective when VN-C11 is automatically reset. 4. Start up [V.Networks Controller]. (☞Page 42) Note In a system where more than one VN-C11 are used, turn on the power for a VN-C11 first and proceed the setting to 2-4 Other Settings with V.Networks Setup Tool. Only then turn on the power for a second one and go on to 2-4. Repeat the procedure for the other cameras. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
25
2-3 Setting the IP Address for VN-C11 with V.Networks Setup Tool (continued)
Note
In a system where more than one VN-C11 are used, turn on the power for a VN-C11 first and
proceed the setting to 2-4 Other Settings with V.Networks Setup Tool.
Only then turn on the
power for a second one and go on to 2-4.
Repeat the procedure for the other cameras.
2.
Confirm the settings.
3.
Click
.
4.
Start up [V.Networks Controller].
(
☞
Page 42)
For other settings,
☞
next page
Click
to update the values.
Select whether to use DHCP.
Note
●
With DHCP selected, the IP ad-
dress of the DHCP server etc. can
be checked.
Change the IP address to the one alloted,
or approved, by the network administrator.
Note
A new IP address becomes effective
when VN-C11 is automatically reset.
Set the subnet mask to an appropriate
value according to the operating environ-
ment. Ask the network administrator if nec-
essary.
[V.Networks ID] works as an identifica-
tion code set to VN-C11. Only alphanu-
meric characters can be used. This ID
does not directly affect the operation by
the user. Normally, the ID should be set
as “CAM00001,” “CAM00002” etc.
(0 to 8 characters)
Click
.