JVC DLA-X30B Instructions - Page 57

ENGLISH Adjustments and settings in the menu (continued) Select cursor Picture Adjust >> User Name Edit Name User 1 AB C NO P ab c no p 12 3 !" # :; | SPACE DE F QR S de f qr s 45 6 $% & ~( ) Clear G H IJ TU gh ty VW ij vw 78 *+ 90 -/ < > [] All Clear KL M XY Z kl m xy z OK Exit MENU Select Operate Back BACK Input cursor Character list Clear Motion Drive Off Mode 1 Mode 2 Mode 3 Mode 4 Film Motion CMD Demo Left Right Top Bottom Off Lens Aperture Lamp Power Normal High It improves video images with fast movements to produce clear video images with little residual image retention. This cannot be set when the PC Signal/3D Signal and "[2-3] 2D/3D" are ON. Moreover, it may happen that the image is distorted in some scenes, or light and dark flashes occur. In this case, please choose "Off", etc., and then a setting of your choice. Settings: Off, Mode 1, Mode 2, Mode 3, Mode 4, Inverse Telecine [Off] Off Black insertion weak Black interpolation strong Interpolation weak Interpolation strong With 60i/60p signals, e.g of TV-broadcast and DVDs, original 24 frame video image footage is changed to a 24 frame display. (*) 24p will not function. It is possible to confirm the effect of the setting of Mode 3 and Mode 4 of the Clear motion drive. Upon pressing the button "OK", it will be displayed on all sides of a screen in the center split into two parts. Finally, it will turn to "Off". It cannot be set for PC and 3D signals. Settings: Left, right, top, Bottom, Off [Off] The left screen displays a demonstration of the Clear motion drive. The right screen displays a demonstration of the Clear motion drive. The upper screen displays a demo of the Clear motion drive. The screen below displays a demo of the Clear motion drive. The Demo of the Clear motion drive is turned off. Adjusts the amount with which the optical iris is squeezed. A setting of 0 means fully opened. Settings: (Dark) -15 to 0 (bright) [0] It is possible to change the brightness of the lamp. (*) If continually used with "High", the lamp will become dark earlier. (*) The more one lets the interior temperature of the device rise due to generation of heat, the less the level of tolerance against high temperatures. (*) For about 60 seconds after the lamp is lit, the lamp cannot be switched off. (*) This will be "High" when the "Picture Mode" is set to "3D". 90 70 (*) This will be "High" when the "Picture Mode" is set to "3D", "Film" and "Cinema". X307 Settings: Normal, High [Normal] Normally this setting is chosen.(160W drive) In a bright room, when the video is hard to see, this setting is chosen.(220W drive) Operation 57