JVC DLA-X30B Instructions - Page 78
Replacing the Lamp
View all JVC DLA-X30B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
4 Maintenance Replacing the Lamp The lamp is a consumable item. If the image is dark or the lamp is turned off, replace the lamp unit. ● When the lamp replacement time approaches, a message is displayed on the screen and the condition is indicated by the indicator. (Reference page: 17 to 18, 86) CAUTION ● Do not insert your hands into the opening of the lamp! This could cause obvious deterioration of the equipment's function, wounds and electric shocks. ● Do not replace the lamp immediately after the unit has been used, and allow a cooling period of 1 hour or more before replacement. The temperature of the lamp is still high and this may cause a burn. ● Do not apply shock to the lamp unit. It may cause lamp blowout. ● Do not use flammable air duster to clean the internal parts of the unit. This may cause fire. MEMO Usable Lamp Life ● When using the "Lamp Power" set at "Normal", the lifetime of the lamp will be approximately 3000 hours. This is an average lifetime and cannot be guaranteed. ● The lamp life may not reach 3000 hours depending on the operating conditions. ● When the lamp has reached the end of its usable life, deterioration progresses rapidly. ● If the picture becomes dark, the tint becomes strange, or the image flickers, promptly the lamp unit for a new one. Lamp replacement procedure 1 Remove the power plug from the outlet 2 Remove the lamp cover ● Remove the screws with a screwdriver. 3 Loosen the screws on the lamp unit ● Loosen the screws with a screwdriver. 4 Pull out the lamp unit ● Grasp the handle and pull out the lamp unit. Purchasing the Lamp Unit Please consult your authorized dealer. ■ Lamp Unit Part No.: PK-L2210U 78 Handle