JVC GR-DVF31 Instruction Manual
JVC GR-DVF31 - Web Camera Manual
 |
UPC - 046838157714
View all JVC GR-DVF31 manuals
Add to My Manuals
Save this manual to your list of manuals |
JVC GR-DVF31 manual content summary:
- JVC GR-DVF31 | Instruction Manual - Page 1
DIGITAL VIDEO CAMERA GR-DVF31 Please visit our CyberCam Homepage on the World Wide Web and answer our Consumer Survey (in English only): http://www.jvc-victor.co.jp/english/index-e.html INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which is located on the bottom of cabinet. - JVC GR-DVF31 | Instruction Manual - Page 2
the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The AA-V20U AC Power Adapter/Charger should be used with: AC 120 V`, 60 Hz in the USA and Canada, AC 110 - 240 V`, 50/60 Hz in other countries. CAUTION (applies - JVC GR-DVF31 | Instruction Manual - Page 3
to your home, consult your product dealer or local power company. If your product is intended to operate from battery power, or other sources, refer to the operating instructions. 3. Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in - JVC GR-DVF31 | Instruction Manual - Page 4
any way. f. When the product exhibits a distinct change in performance-this indicates a need for service. 3. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original - JVC GR-DVF31 | Instruction Manual - Page 5
PROVIDED ACCESSORIES • AC Power Adapter/Charger AA-V20U TW •Remote Control Unit RM-V711U •Battery Pack BN-V207U • Lithium Battery CR2025 (for remote control unit) •Shoulder Strap •Editing Cable •DC Cord •PC Connection Cable • CD-ROM The CD ROM contains the following 5 software programs: • JLIP Video - JVC GR-DVF31 | Instruction Manual - Page 6
with other equipment. CHARGING THE BATTERY PACK 1 Make sure you unplug the camcorder's DC cord from the AC Power Adapter/Charger. Plug the AC Adapter/ Charger's power cord into an AC outlet. The POWER indicator lights. 2 Remove the battery pack's protective cap. Attach the battery pack with its long - JVC GR-DVF31 | Instruction Manual - Page 7
AC Power Adapter/Charger. Read the VU-V856KIT's instruction manuals before using. It is impossible to charge the BN-V856U battery pack using the provided AC Power Adapter/Charger. Use the optional AA-V80U AC Power Adapter/Charger. Core filter AC Power Adapter/Charger AA-V20U To AC outlet DC cord - JVC GR-DVF31 | Instruction Manual - Page 8
is integrated in the camcorder. While the camcorder is connected to an AC outlet using the AC Power Adapter/Charger, or while the battery pack attached to the camcorder continues to supply power, the clock's rechargeable lithium battery is always charged. However, if the camcorder is not used for - JVC GR-DVF31 | Instruction Manual - Page 9
Erase protection switch* OPEN/EJECT Switch Cassette holder PUSH OPEN Button Cassette cover Make sure the window side is facing out. PUSH HERE 9 EN Loading/Unloading A Cassette The camcorder needs to be powered up to load or eject a cassette. 1 Press PUSH OPEN and open the LCD monitor. 2 Slide - JVC GR-DVF31 | Instruction Manual - Page 10
Set depending on your preference. 1 Set the Power Switch to " ". The power lamp lights and the camcorder is turned on. 2 Press MENU/BRIGHT. The it twice to exit from the Recording Menu. •Audio Dubbing is impossible on a tape recorded in the LP mode. •"LP" (Long Play) is more economical, providing - JVC GR-DVF31 | Instruction Manual - Page 11
Power Zoom Lever. Refasten the Velcro strip. Viewfinder Adjustment 1 Set the Power Switch to " " or " ". The power lamp comes on and the camcorder illustration 4. Tripod Mounting 1 Align the screw and camera direction stud on the tripod with the camera's mounting socket and stud hole. Then tighten - JVC GR-DVF31 | Instruction Manual - Page 12
12 EN Recording Start/Stop Button Power Switch Display 25 min During shooting Tape remaining time indicator (Approximate) min 90 min the lens cap to remove it, then set the Power Switch to " " or " ". The power lamp lights and the camcorder enters the Record-Standby mode. "PAUSE" is displayed - JVC GR-DVF31 | Instruction Manual - Page 13
● If the Record-Standby mode continues for 5 minutes, the camcorder's power shuts off automatically. To turn the camcorder on again, set the Power Switch to "OFF", then back to " " or " ". ● When a blank portion is left between recorded scenes on the tape, the time code is interrupted and errors may - JVC GR-DVF31 | Instruction Manual - Page 14
Zoom cannot be used while functions done through digital image processing (Picture Wipe/ Dissolve function, ੬ pg. 22, Video Echo, ੬ pg. 24, etc.) are activated. ● Macro shooting (as close as approx. 5 cm (2") to the subject) is possible when the Power Zoom Lever is set all the way to "W". See - JVC GR-DVF31 | Instruction Manual - Page 15
that you consult your nearest JVC dealer for replacing the video light. EN15 FEATURE: Video Light PURPOSE: To brighten video light. Ⅲ When not using the video light, turn it off to save battery power. NOTES: ● Even if the battery indicator ( ) does not blink due to low battery charge, the camcorder - JVC GR-DVF31 | Instruction Manual - Page 16
:00". This means the camcorder may record the same time codes as those existing in a previously recorded scene. To prevent this, perform "Recording From The Middle of A Tape" below in the following cases; •When shooting again after playing back a recorded tape. •When power shuts off during shooting - JVC GR-DVF31 | Instruction Manual - Page 17
camcorder like a regular camera to take a snapshot, or several of them in succession. SNAPSHOT MODE SELECTION 1 Set the Power Switch to " " or " ". Power is engaged, Snapshot recording will be performed in the FULL mode during Digital Zoom. ● If Snapshot recording is not possible, "PHOTO" blinks - JVC GR-DVF31 | Instruction Manual - Page 18
easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. 1 Set the Power Switch to " ". Display 2 Press MENU/BRIGHT. The Recording Menu appears. 4 FOCUS MANUAL EXPOSURE AUTO W. BALANCE AUTO FADER OFF / WIPE P. AE OFF / EFFECT TO MODE MENU 0 END - JVC GR-DVF31 | Instruction Manual - Page 19
this mode, refer to your wide-screen TV's instruction manual. During playback/recording on 4:3 TVs/ LCD monitor/ 400X digital magnification. DIS OFF To compensate for unstable images caused by camera- Switch off the Digital Image Stabilizer (DIS) when recording with the camcorder on a tripod. - JVC GR-DVF31 | Instruction Manual - Page 20
camcorder (੬ pg. 21). OFF Keeps all the indications (except the tape running indicator, warnings, etc.) from appearing in the camcorder (੬ pg. 21). OFF Keeps the camcorder This number is necessary when connecting the camcorder to a device such as a computer using the J terminal (JLIP). The - JVC GR-DVF31 | Instruction Manual - Page 21
● The Date/Time is always displayed when the Power Switch is set to " ". ● Connect the camcorder to a TV and set "ON SCREEN" to and the menu disappears. RECORDING NOTES: ● It is impossible to make the tape running indicator "444", warnings, etc. disappear from the LCD monitor or the viewfinder - JVC GR-DVF31 | Instruction Manual - Page 22
Menu disappears and the effect is reserved. The indicator representing the selected effect appears. Power Switch 5 Press the Recording Start/Stop Button to activate the Fade-in/out recording (without having turned the camcorder's power off), the previous scene wipes out, revealing the new scene. - JVC GR-DVF31 | Instruction Manual - Page 23
Fade in or out with a full-screen mosaic effect. FADER - B.W WIPE - CORNER WIPE - WINDOW WIPE - SLIDE Fade in to a color screen from a black and white screen, or fade out this function is activated, the camcorder randomly selects the effect used in scene transition (from , and ). The - JVC GR-DVF31 | Instruction Manual - Page 24
Power Switch to " ". 2 Press MENU/BRIGHT. The Recording Menu appears. MENU/BRIGHT Dial Power camcorder automatically adjusts the focus from approx. 10 m (32 ft) to infinity. From less than 10 m (32 ft), adjust the focus manually areas. ● The Manual Focus indication may appear and flash when "SLOW" is - JVC GR-DVF31 | Instruction Manual - Page 25
may automatically zoom out depending on the distance between the camcorder and the subject. This will not occur when "TELE MACRO" (੬ pg. 20) is activated. MENU/BRIGHT Dial Power Switch FOCUS FOCUS NOTES: ● When the power is turned off, Manual Focus will be reset to "AUTO". ● Be sure to focus - JVC GR-DVF31 | Instruction Manual - Page 26
Switch 1 Set the Power Switch to " ". 2 Press MENU/BRIGHT. The Recording Menu appears. EXP. To darken the image 3 Rotate MENU/BRIGHT to move the highlight bar to "EXPOSURE", then press it. 6 4 Rotate MENU/BRIGHT to display "MANUAL", then press it. The Recording Menu disappears. "EXP." and - JVC GR-DVF31 | Instruction Manual - Page 27
The indication displayed in the upper left corner changes from "EXP." to "MANUAL". To Return To Automatic Iris Control . . . .... rotate MENU/BRIGHT it in step 4. The exposure control indicator and " " disappear. Or, set the Power Switch to " ". To Lock The Exposure Control And The Iris . . . .... - JVC GR-DVF31 | Instruction Manual - Page 28
camcorder operators control this function manually to achieve a more professional color/tint reproduction. 1 Set the Power manually. " " - Outdoors on a sunny day. " " - Outdoors on a cloudy day. " " - A video manually, the setting is retained even if the power is turned off or the battery removed. - JVC GR-DVF31 | Instruction Manual - Page 29
mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to "OFF", then to power is supplied from a battery: the " " battery pack remaining power indicator is displayed. When power is supplied through the DC cord - JVC GR-DVF31 | Instruction Manual - Page 30
you to set the following functions: Playback Sound (32 kHz, 48 kHz), Synchro Comp, Indication, Display and Time Code. The following procedure applies to all except Synchro Comp (੬ pg. 46, 47). 1 Set the Power Switch to " ". 2 Press MENU/BRIGHT. The Playback Menu appears. 3 Move the highlight - JVC GR-DVF31 | Instruction Manual - Page 31
for "FULL SOUND", "SOUND 1" or "SOUND 2". For tapes recorded at 48 kHz, set in the same manner. NOTES: control at the camcorder's remote sensor. ● The camcorder cannot detect the sound the date is automatically recorded separately from the recorded video signal. You can display or remove the date - JVC GR-DVF31 | Instruction Manual - Page 32
connections, refer also to your VCR and TV instruction manuals. AA. C.onnCeoctnionn etoctaioTVn otroVaCRTeVquoiprpeVdCwRitheqanuSip-VpIDeEdO wINiathndaAn/VS-inVpIuDt EO INconannecdtoArs/V input connectors Use optional S-Video and Audio cables. Yellow: Not connected Yellow: Not connected White to - JVC GR-DVF31 | Instruction Manual - Page 33
input, referring to your VCR's instruction manual. 4 Turn on the camcorder, the VCR and the TV. 5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode. EN33 NOTES: ● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (੬ pg. 7). ● To - JVC GR-DVF31 | Instruction Manual - Page 34
● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (੬ pg. 7). ● Never connect the PC connection cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder. ● The date/time information cannot be - JVC GR-DVF31 | Instruction Manual - Page 35
cable (provided) to the printer's PC connector and the PC's RS-232C connector. 4 Turn the camcorder's Power Switch to " turn on the other units. " and NOTES: ● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (੬ pg. 7). ● For Digital - JVC GR-DVF31 | Instruction Manual - Page 36
R Audio/Video cable (optional) S-Video cable (optional) White to AUDIO L IN Red to AUDIO R IN To VIDEO IN* To S-VIDEO IN VCR (Recording deck) TV Tape Dubbing 1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 32 and 33. 2 Set the camcorder's Power Switch to - JVC GR-DVF31 | Instruction Manual - Page 37
the playback on the monitor, engage the DV connector-equipped video unit's record mode from the spot on the source tape you want to begin recording. NOTES: ● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack ( ੬ pg. 7). ● If the remote control is - JVC GR-DVF31 | Instruction Manual - Page 38
38 EN 2 13 1 Knob USING THE REMOTE CONTROL UNIT Installing The Battery The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast- or when the remote sensor is directly exposed to sunlight or powerful lighting. 30° - JVC GR-DVF31 | Instruction Manual - Page 39
Button 4 SHIFT Button 5 SLOW Rewind/Forward Buttons Left/Right Buttons 6 FADE/WIPE Button With the camcorder's Power Switch set to the camera position (" " or " "). - Zoom in/out (੬ pg. 14) - - - - - With the camcorder's Power Switch set to " ". ੬ pg. 43 Zoom in/out (੬ pg. 40) ੬ pg. 20 ੬ pg. 40 - JVC GR-DVF31 | Instruction Manual - Page 40
(4). NOTES: ● During Slow-Motion Playback, due to digital image processing, the picture may take on a mosaic effect Playback, there will be disturbances in video and the picture may seem unstable, Make sure the remote control is pointed at the camcorder's remote sensor. Pressing T zooms in. 3) You - JVC GR-DVF31 | Instruction Manual - Page 41
start playback, press PLAY (4). 2) Point the remote control at the camcorder's remote sensor and press EFFECT. The PLAYBACK EFFECT Select Menu appears. during playback are Classic Film, Monotone, Sepia, Strobe and Video Echo. The effects work the same in playback as they did in recording. Refer - JVC GR-DVF31 | Instruction Manual - Page 42
videos easily using your camcorder manually. Before operation, make sure the lithium battery GE HITACHI JVC A power power comes on. 2 Make sure the VCR's power JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions. NOTES: ● If the VCR's power power on manually - JVC GR-DVF31 | Instruction Manual - Page 43
and set the Power Switch to " ". 3 Turn the power on, insert a recordable tape and engage the AUX mode (refer to the VCR's instructions). SELECT SCENES 4 Press PLAY (4) and then press R.A.EDIT ON/OFF on the remote control. Make sure to point the remote control at the camcorder's remote sensor. The - JVC GR-DVF31 | Instruction Manual - Page 44
codes register time only as accurately as seconds, the time code total time may not match the total program time exactly. ● Turning off the camcorder's power erases all registered Edit-In and Edit-Out points. ● If you select Sepia or Monotone mode from Program AE with special effects, you cannot - JVC GR-DVF31 | Instruction Manual - Page 45
Random Assemble Editing Menu Remote Sensor AUTOMATIC EDITING TO VCR EN45 11 Rewind the tape in the camcorder to the beginning of the scene you want to edit and press PAUSE (6). ), or manually engage the VCR's Record-Pause mode. 13 Press the Recording Start/Stop Button on the camcorder. Editing - JVC GR-DVF31 | Instruction Manual - Page 46
not want. For a cleanly edited tape, confirm and adjust the timing of the camcorder against your VCR. DIAGNOSING VCR/CAMCORDER TIMING VCR TV (Recording deck) Remote sensor 1 Play back the tape in the camcorder, then point the remote control at the camcorder's remote sensor and press R.A.EDIT - JVC GR-DVF31 | Instruction Manual - Page 47
SOUND1 0 . 0 ON ON OFF Playback Menu END 48kHz MODE 32kHz MODE 4 SYNCHRO INDICATION DISPLAY TIMECODE FULL SOUND SOUND1 0 . 0 ON ON OFF END EN47 ADJUSTMENT OF VCR/CAMCORDER TIMING 4 Point the remote control at the camcorder's remote sensor and press R.A.EDIT ON/OFF to make the Random Assemble - JVC GR-DVF31 | Instruction Manual - Page 48
on the tape, the sound may be disrupted. Make sure you only edit recorded areas. ● If feedback or howling occurs during TV Playback, move the camcorder's microphone tape moves to scenes recorded in the LP mode, scenes recorded at 48 kHz or a blank portion, Audio Dubbing stops and "ERROR! REFER MANUAL - JVC GR-DVF31 | Instruction Manual - Page 49
the AC Power Adapter/Charger securely (੬ pg. 7). •Replace the dead battery with a fully charged one (੬ pg. 6, 7). 2. •Connect the camcorder to an AC outlet using the AC Power Adapter/Charger for over 24 hours to charge the clock's lithium battery (੬ pg. 8). 3. •Set the tape's erase protection - JVC GR-DVF31 | Instruction Manual - Page 50
50 EN TROUBLESHOOTING (cont.) SYMPTOM 10. Digital Zoom does not work. 11. Program AE with special effects and Fade/Wipe Effects do not work. 12. The Black & White Fader does not work. 13. The Dissolve function does not work. POSSIBLE CAUSES 10. •16X optical zoom is selected. •The Video Echo mode - JVC GR-DVF31 | Instruction Manual - Page 51
16. Scene transition does not go as expected. 17. The Video Echo mode does not work. 18. Even when Slow Shutter is •Make sure the Squeeze mode is set to "OFF" (੬ pg. 18, 19). •Do not try to use the Video Echo mode during a Fade-In or Fade-Out (੬ pg. 24). 18. •If you want the lighting to look more - JVC GR-DVF31 | Instruction Manual - Page 52
FastForward functions do not work. 32. The tape is moving, but there is no picture. TROUBLESHOOTING (cont.) POSSIBLE CAUSES 25. •In places the camcorder. •When the LCD monitor's fluorescent light reaches the end of its service life, images on the LCD monitor become dark. Consult your nearest JVC - JVC GR-DVF31 | Instruction Manual - Page 53
on the AC Power Adapter/ Charger does not light. 39. The recording mode indicator "LP" blinks. 40. Picture does not appear on the LCD monitor. 41. When the image is printed from the printer, a black bar appears at the bottom of the screen. 42. When the camcorder is connected via the DV connector - JVC GR-DVF31 | Instruction Manual - Page 54
BATTERY RELEASE and remove the battery pack. 6 Replace the lens cap over the lens. PUSH OPEN Button OPEN/EJECT Switch PUSH HERE USER MAINTENANCE Cleaning The Camcorder ● Cleaning should be done only after the battery pack has been removed or other power units have been disconnected. ● Mold may - JVC GR-DVF31 | Instruction Manual - Page 55
AC PLUG ADAPTER In case of connecting the unit's power cord to an AC wall outlet other than American National Standard C73 series type use an AC plug adapter, called a "Siemens Plug", as shown. For this AC plug adapter, consult your nearest JVC dealer. Plug adapter Video Light DANGER Ⅲ The video - JVC GR-DVF31 | Instruction Manual - Page 56
After the camcorder plays back for about 20 seconds, it stops automatically. Also refer to the Cleaning Cassette's instructions. If, after using the Cleaning Cassette, the problems still exist, consult your nearest JVC dealer. Mechanical moving parts used to move the video heads and video tape tend - JVC GR-DVF31 | Instruction Manual - Page 57
digital device, pursuant to Part JVC dealer. The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Power Adapter/Battery Charger - JVC GR-DVF31 | Instruction Manual - Page 58
58 EN 1 INDEX Controls, Connectors And Indicators y u i o t ^&* ( 2 3 p 4 Q 56 7 8 ) r q we0Q9W E ! # @ $ % RT - JVC GR-DVF31 | Instruction Manual - Page 59
is not possible if the VCR is not equipped with a J terminal. w PC Connector pg. 34 It is used to connect the camcorder to the serial port of a personal computer. For further details, consult your nearest JVC dealer. e Digital Video Connector [DV IN/OUT] (i.link pg. 35, 37 * i.Link refers to the - JVC GR-DVF31 | Instruction Manual - Page 60
W % 1* 2 3 4 5* 6* 7* MANUAL LP 35 min WH A PS REC 8 1/250 PAUSE 0 444 6w 9 0 L PHOTO E01 0 TAPE ! ! 160XSET DATE / TIME ! 5S MODE Appears when in the Squeeze or Cinema mode. (੬ pg. 19) 4 Appears when Digital Image Stabilizer ("DIS") is engaged. (੬ pg. 19) 5* Appears when in the - JVC GR-DVF31 | Instruction Manual - Page 61
is detected on the heads during recording. (੬ pg. 56) TAPE! LENS COVER TAPE END SET DATE/TIME! ERROR! REFER MANUAL E01 - E06 Appears if condensation occurs. When this indication is displayed, the camcorder turns off automatically. Appears for 10 seconds after power is turned on if there is no - JVC GR-DVF31 | Instruction Manual - Page 62
AC Power Adapter/Charger pg. 6, 7 Audio Dubbing pg. 48 Auto Focus pg. 25 Auto Shut off pg. 13, 29 B Battery Low pg. 61 Battery Pack pg. 6, 7, 55 Brighten The LCD Monitor pg. 12 Built-in Clock's Lithium Battery pg. 8 C Charge The Battery Unload A Tape pg. 9 V Video Echo pg. 24 Video Light - JVC GR-DVF31 | Instruction Manual - Page 63
SPECIFICATIONS Camcorder EN63 General Power supply : DC 6.3 V (Using AC Power Adapter/Charger) DC 7.2 V (Using battery pack) Power consumption LCD monitor off, viewfinder on : Approx. 4.6 W LCD monitor on, viewfinder off : Approx. 5.7 W Video light : Approx. 3.9 W Format : DV Format (SD - JVC GR-DVF31 | Instruction Manual - Page 64
EN GR-DVF31 VICTOR COMPANY OF JAPAN, LIMITED COPYRIGHT© 1999 VICTOR COMPANY OF JAPAN, LTD. U Printed in Japan * * 0699MKV UN YP
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
 |
 |
DIGITAL VIDEO CAMERA
LYT0420-001B
INSTRUCTIONS
EN
GR-DVF31
Please visit our CyberCam Homepage on the
World Wide Web and answer our Consumer
Survey (in English only):
For Customer Use:
Enter below the Model No. and Serial No. which is located on the
bottom of cabinet. Retain this information for future reference.
Model No.
Serial No.
ENGLISH
CONTENTS
SAFETY PRECAUTIONS
2 – 5
PROVIDED ACCESSORIES
5
GETTING STARTED
6 – 11
Power
............................................
6
Date/Time Settings
............................
8
Loading/Unloading A Cassette
...............
9
Recording Mode Setting
.....................
10
Grip Adjustment
..............................
11
Viewfinder Adjustment
......................
11
Shoulder Strap Attachment
.................
11
Tripod Mounting
...............................
11
RECORDING
12 – 28
Basic Recording
...............................
12
Advanced Features
...........................
17
PLAYBACK
29 – 35
Basic Playback
................................
29
Advanced Features
...........................
30
Basic Connections
.............................
32
Advanced Connections
.......................
34
TAPE DUBBING
36 – 37
Tape Dubbing
..................................
36
Digital Dubbing
................................
37
USING THE REMOTE CONTROL
UNIT
38 – 48
Random Assemble Editing
...................
42
For More Accurate Editing
...................
46
Audio Dubbing
.................................
48
TROUBLESHOOTING
49 – 53
USER MAINTENANCE
54
CAUTIONS
55 – 57
INDEX
58 – 62
Controls, Connectors And Indicators
.......
58
Indications
.....................................
60
Terms
...........................................
62
SPECIFICATIONS
63