JVC GR-DVF31 Instruction Manual - Page 54

User Maintenance

Page 54 highlights

54 EN After Use 1 Turn off the camcorder. 2 Press PUSH OPEN and open the LCD monitor. Slide OPEN/EJECT in the direction of the arrow, then swing the cassette cover open until it locks. The cassette holder opens automatically. Remove the cassette. 3 Press "PUSH HERE" to close the cassette holder, then close the cassette cover. 4 Close and lock the LCD monitor. 5 Slide BATTERY RELEASE and remove the battery pack. 6 Replace the lens cap over the lens. PUSH OPEN Button OPEN/EJECT Switch PUSH HERE USER MAINTENANCE Cleaning The Camcorder 1 To clean the exterior, wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth. 2 Open the LCD monitor and wipe gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor. 3 To clean the lens, blow it with a blower brush, then wipe gently with lens cleaning paper. 4 To clean the viewfinder, raise it to the vertical position. Carefully lift the plastic tab on the bottom of the viewfinder, and open the cover 1. 5 Insert a lens blower or soft cloth into the gap at the bottom of the viewfinder and clean the interior of the viewfinder with it 2. 6 Replace the lens cap, making sure it locks in place. Tilt the viewfinder back to the horizontal position. NOTES: ● Avoid using strong cleaning agents such as benzine or alcohol. ● Cleaning should be done only after the battery pack has been removed or other power units have been disconnected. ● Mold may form if the lens is left dirty. ● When using a cleaner or chemically treated cloth refer to the cautions of each product. Cassette holder Remove. BATTERY RELEASE Switch Bottom of viewfinder Blower brush 2 1 Cover

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

54
EN
USER MAINTENANCE
BATTERY RELEASE Switch
Remove.
OPEN/EJECT Switch
PUSH HERE
Cassette holder
PUSH OPEN Button
Cleaning The Camcorder
1
To clean the exterior, wipe gently with a soft
cloth.
Put the cloth in diluted mild soap and wring it
well to wipe off heavy dirt. Then wipe again
with a dry cloth.
2
Open the LCD monitor and wipe gently with a
soft cloth.
Be careful not to damage the
monitor.
Close the LCD monitor.
3
To clean the lens, blow it with a blower brush,
then wipe gently with lens cleaning paper.
4
To clean the viewfinder, raise it to the vertical
position.
Carefully lift the plastic tab on the
bottom of the viewfinder, and open the cover
1
.
5
Insert a lens blower or soft cloth into the gap at
the bottom of the viewfinder and clean the
interior of the viewfinder with it
2
.
6
Replace the lens cap, making sure it locks in
place. Tilt the viewfinder back to the horizontal
position.
NOTES:
Avoid using strong cleaning agents such as benzine
or alcohol.
Cleaning should be done only after the battery
pack has been removed or other power units have
been disconnected.
Mold may form if the lens is left dirty.
When using a cleaner or chemically treated cloth
refer to the cautions of each product.
After Use
1
Turn off the camcorder.
2
Press
PUSH OPEN
and open the LCD monitor.
Slide
OPEN/EJECT
in the direction of the arrow,
then swing the cassette cover open until it locks.
The cassette holder opens automatically.
Remove the cassette.
3
Press “PUSH HERE” to close the cassette holder,
then close the cassette cover.
4
Close and lock the LCD monitor.
5
Slide
BATTERY RELEASE
and remove the battery
pack.
6
Replace the lens cap over the lens.
2
1
Cover
Blower brush
Bottom of viewfinder