JVC GR-DVF31 Instruction Manual - Page 36

36 EN To Video Output* White to Audio Output L The connectors are located beneath the cover. To S-Video Output Red to Audio Output R Audio/Video cable (optional) S-Video cable (optional) White to AUDIO L IN Red to AUDIO R IN To VIDEO IN* To S-VIDEO IN VCR (Recording deck) TV Tape Dubbing 1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 32 and 33. 2 Set the camcorder's Power Switch to " ", turn on the VCR's power, and insert the appropriate cassettes in the camcorder and the VCR. 3 Engage the VCR's AUX and Record-Pause modes. 4 Engage the camcorder's Play mode to find a spot just before the edit-in point. Once it is reached, press 4/ 6 on the camcorder. 5 Press 4/6 on the camcorder and engage the VCR's Record mode. 6 Engage the VCR's Record-Pause mode and press 4/6 on the camcorder. 7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished. NOTES: ● You can use Playback Zoom (੬ pg. 40) or Playback Special Effects (੬ pg. 41) in step 5. ● Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape. To choose whether or not the following displays appear on the connected TV . . . • Date/Time .... set "DISPLAY" to "ON" or "OFF" in the Playback Menu (੬ pg. 30). •Time Code .... set "TIME CODE" to "ON" or "OFF" in the Playback Menu (੬ pg. 30). •Playback Sound Mode Display .... set the Power Switch to " ". Press MENU/BRIGHT and set "ON SCREEN" in the Date/Time Menu (੬ pg. 18 - 20) to "ON" or "OFF". Then, set the Power Switch back to " ". * Connect when an S-Video cable is not used.