JVC GR-DVF31 Instruction Manual - Page 21

MENU/BRIGHT Dial Power Switch NOTES: ● The Date/Time is always displayed when the Power Switch is set to " ". ● Connect the camcorder to a TV and set "ON SCREEN" to "ON" in the Date/Time Menu. The display appears on the connected TV . ● Even if "ON SCREEN" is set to "ON", the indications are removed from the TV if "INDICATION" is set to "OFF". EN21 Date/Time Display During Recording You should already have set the date and time ("Date/Time Settings", ੬ pg. 8). 1 Set the Power Switch to " ". 2 Press MENU/BRIGHT. The Recording Menu appears. 3 Move the highlight bar to "TO MODE MENU" by rotating MENU/BRIGHT. Press it and the Mode Menu appears. 4 Move the highlight bar to "TO DATE/TIME MENU" by rotating MENU/BRIGHT. Press it and the Date/ Time Menu appears. 5 Move the highlight bar to "DISPLAY" by rotating MENU/BRIGHT, then press it. 6 Move the highlight bar to "ON" or "OFF" by rotating MENU/BRIGHT. Press it and the highlight bar automatically moves to "RETURN". 7 Press MENU/BRIGHT twice. Selection is complete and the menu disappears. RECORDING NOTES: ● It is impossible to make the tape running indicator "444", warnings, etc. disappear from the LCD monitor or the viewfinder. For indications that can be removed, ੬ pg. 60. ● If "INDICATION" is set in the Date/Time Menu, "INDICATION" in the Playback Menu will also be set to the same setting (੬ pg. 31). LCD Monitor/Viewfinder Indications You can make the LCD monitor/Viewfinder indications appear/disappear. Before the following steps, perform steps 1 through 4 above. 5 Move the highlight bar to "INDICATION" by rotating MENU/BRIGHT, then press it. 6 Rotate MENU/BRIGHT to display the desired setting. OFF : To make the indications disappear. ON : To make the indications appear. Then press it and the highlight bar automatically moves to "RETURN". 7 Press MENU/BRIGHT twice. Selection is complete and the menu disappears.