JVC GR-DVF31 Instruction Manual - Page 20

20 EN Date/Time Menu Explanations RECORDING Advanced Features (cont.) INDICATION ON SCREEN* DISPLAY DATE/TIME ON Makes all the indications appear in the camcorder (੬ pg. 21). OFF Keeps all the indications (except the tape running indicator, warnings, etc.) from appearing in the camcorder (੬ pg. 21). OFF Keeps the camcorder's display from appearing on the connected TV screen. ON Makes the camcorder's display appear on screen when the camcorder is connected to a TV. ON Makes the date/time settings appear in the camcorder (੬ pg. 21). OFF Keeps the date/time settings from appearing in the camcorder. Allows you to set the current date and time (੬ pg. 8). * You can also change "ON SCREEN" to "ON" or "OFF" by pressing the DISPLAY button on the RM-V711U remote control. System Menu Explanations TELE MACRO WIND CUT SOUND MODE ID NUMBER DEMO. MODE OFF ON Usually the distance to a subject where the lens is in focus depends on the zoom magnification. Unless there is a distance more than 1m (3.25 ft) to the subject, the lens is out of focus at the maximum telephoto setting. When set to "ON", you can shoot a subject as large as possible at a distance of approx. 60 cm (23-5/8"). •Depending on the zoom position, the lens may go out of focus. OFF Disengages the function which cuts down on noise created by wind. ON Helps cut down on noise created by wind. •" " appears. •The quality of the sound will change. This is normal. 32 kHz Enables recording of stereo sound on four separate channels, and is recommended for use when performing audio dubbing. 48 kHz Enables recording of stereo sound on two separate channels. This number is necessary when connecting the camcorder to a device such as a computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06. OFF Automatic demonstration will not take place. ON Demonstrates certain functions such as Program AE with special effects, etc., and can be used to confirm how these functions operate. When "DEMO. MODE" is set to "ON" and the Recording Menu is closed, demonstration starts. NOTES: ● If a tape is in the camcorder, the demonstration cannot be turned on. ● By turning off the camcorder, "DEMO. MODE" is set to "OFF" automatically. : Factory preset