JVC KD-G820 Instructions - Page 16
Sound adjustments
View all JVC KD-G820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
ENGLISH Sound adjustments Adjusting the sound You can adjust the sound characteristics to your preference. • When appears on the display, you can move back to the previous display by pressing number button 3. 1 2 2 Use 4/¢ to select a cutoff frequency to the subwoofer. • 80Hz: Frequencies higher than 80 Hz are cut off. • 120Hz: Frequencies higher than 120 Hz are cut off. • 160Hz: Frequencies higher than 160 Hz are cut off. 3 Turn the control dial to adjust the subwoofer output level. [0 to 8] C VolAdjust Turn the control dial to adjust the input level of each source (except FM). [-5 to +5] Adjust to match the input level of the FM sound level. • Before making an adjustment, select a source you want to adjust. • For "EQ" setting, see the following. 3 Adjust the selected setting item. A Fad/Bal (Fader/Balance) 1 Press number button 1 ( ) to move to the "Fad/Bal" adjustment display. 2 Adjust the speaker output balance by pressing: 5 / ∞: between the front and rear speakers. [F06 to R06] 4/¢ : between the left and right speakers. [L06 to R06] B Subwoofer 1 Press number button 1 ( ) to move to the "Subwoofer" adjustment display. D Loudness Turn the control dial to activate or deactivate the loudness to produce a well-balanced sound at low volume levels. [Off or On] 4 Exit from the setting. Selecting preset sound modes (i-EQ: intelligent equalizer) You can select a preset sound mode suitable to the music genre. Available sound modes FLAT (No sound mode is applied), H.ROCK (Hard rock), R & B (Rhythm & blues), POP, JAZZ, DANCE, COUNTRY, REGGAE, CLASSIC, USER 1, USER 2, USER 3 16