JVC KD-SHX850 Instructions - Page 54

ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. General FM/AM Symptoms Causes Remedies • Sound cannot be heard from the speakers. The volume level is set to the Adjust it to the optimum minimum level. level. Connections are incorrect. Check the cords and connections. • The receiver does not work The built-in microcomputer Reset the receiver (see page at all. may have functioned 2). incorrectly due to noise, etc. • "Connect Error" appears on The control panel is not the display. attached correctly. Remove the control panel, wipe the connector, then attach it again (see pages 42 and 49). • "Push Reset" appears on Something is blocking the the display and the control control panel movement. panel movement is freezed. Reset the receiver (see page 2). If this does not work, check the installation. • SSM automatic presetting Signals are too weak. does not work. Store stations manually. • Static noise while listening The antenna is not connected Connect the antenna firmly. to the radio. firmly. • CD-R/CD-RW cannot be CD-R/CD-RW is not played back. finalized. • Tracks on the CD-R/ CD-RW cannot be skipped. • Insert a finalized CD-R/ CD-RW. • Finalize the CD-R/CD-RW with the component which you used for recording. • Disc cannot be ejected. Disc is locked. Unlock the disc (see page 19). • Disc cannot be recognized ("No Disc," "Loading Error," or "Eject Error" appears). The CD player may have functioned incorrectly. Eject the disc forcibly (see page 4). • Disc sound is sometimes You are driving on rough interrupted. roads. Stop playback while driving on rough roads. Disc is scratched. Change the disc. Connections are incorrect. Check the cords and connections. Disc playback 54