JVC TK-WD310U Instructions - Page 11

INTRODUCTION Operating Precautions ● To save energy, when it is not being used turn the system's power off. ● This camera has been designed for indoor use. When you use it outdoors, be sure to use an appropriate housing. ● Do not install or use the camera in the following places. • In a place exposed to rain or moisture. • In a place with vapor or oil soot, for example in a kitchen. • When the ambient temperature rises above or falls below the acceptable range (from -10°C to 50°C). • Near a source of radiation, X-rays, strong radio waves or magnetism. • In a place where corrosive gasses are generated. • In a place subject to vibration. • In a place with excessive dirt. ● If this camera and the cables connected to this camera are used where there are strong electromagnetic waves or where there is magnetism present, for example near a radio or TV transmitter, power transformer or an electric motor, the picture may produce noise and the colours may be affected. ● This camera incorporates an AGC circuit. As a result, when it is used under low light conditions, the camera sensitivity is automatically boosted and the picture may look uneven. However, this is not a malfunction. ● When this camera is used in the ATW mode, the recorded colours may be slightly different from the actual colours due to the operational principles of the auto-tracking white balance circuit. However, this is not a malfunction. ● Hunting may occur depending on the used lens. However, this is not a malfunction of the unit. ● The screen surroundings may appear dark depending on the used lens. 5