JVC TK-WD310U Instructions - Page 41

Item DC OFFSET 4. When selecting EXIT and press- ing the SET button, the screen will return to the CAMERA SETTINGS screen. Content Standard level (brightness) for controlling the DC auto iris operation is set. Increasing the value: the screen will become darker [Setting range: 100 ~ 120 ~ 150] Memo ● Depending on the lens, hunching may occur when setting this value too high. In this case, lower the value. CAMERA TITLE Default setting: OFF Whether to display the camera title is set. OFF : Camera title is not displayed. ON : Camera title is displayed. V PHASE Vertical phase during line lock is adjusted. The vertical phase can be adjusted to other cameras. This setting is enabled when the LL/ INT switch on the back of the unit is set to LL. - - - CA ME RA S E T T I N G S - - - L ENS ADJ U S T.. CAME R A T I T L E CAME R A T I T L E E D I T OFF V PHASE 0 EX I T 84 1 04 ● Press the SELECTOR button in the horizontal direction (8 or t) to set. Pressing in the button to the right (t) will advance the phase and pressing to the left (8) will delay the phase. Set value 35