JVC TK-WD310U Instructions - Page 29

With a fixed-focus lens, With a zoom lens, adjust the camera as follows

Get JVC TK-WD310U - CCTV Camera PDF manuals and user guides
UPC - 046838007972
View all JVC TK-WD310U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

• With a fixed-focus lens If the focus can not be adjusted correctly by rotating the lens focus ring, adjust the back focus as follows. 1. Loosen the back focus locking screws by turning it counter- clockwise ( ) with a Phillips screwdriver. (2 locations) 2. Shoot a pattern closely. 3. Turn the lens focus ring to ∞. 4. Turn the back focus adjustment ring to focus at the best point. 5. Tighten the back focus locking screws by turning it clockwise ( ). (2 locations) • With a zoom lens If the image is out of focus when zooming (telephoto wide-angle), adjust the camera as follows: 1. Loosen the back focus locking screws by turning it counter- clockwise ( ) with a Phillips screwdriver. (2 locations) 2. Shoot a comparatively dark scene with thin lines. 3. Set the lens to the maximum telephoto position, and adjust the lens focus. 4. Set the lens to the maximum wide-angle position, and turn the back focus ring to adjust the focus. (Repeat steps 3. and 4. two or three times.) 5. Tighten the back focus locking screws by turning it clockwise ( ). (2 locations) 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
23
•
With a fixed-focus lens
If the focus can not be adjusted correctly by rotating the lens focus
ring, adjust the back focus as follows.
1.
Loosen the back focus locking screws by turning it counter-
clockwise (
) with a Phillips screwdriver. (2 locations)
2.
Shoot a pattern closely.
3.
Turn the lens focus ring to
∞
.
4.
Turn the back focus adjustment ring to focus at the best point.
5.
Tighten the back focus locking screws by turning it clockwise
(
). (2 locations)
•
With a zoom lens
If the image is out of focus when zooming (telephoto wide-angle),
adjust the camera as follows:
1.
Loosen the back focus locking screws by turning it counter-
clockwise (
) with a Phillips screwdriver. (2 locations)
2.
Shoot a comparatively dark scene with thin lines.
3.
Set the lens to the maximum telephoto position, and adjust
the lens focus.
4.
Set the lens to the maximum wide-angle position, and turn
the back focus ring to adjust the focus.
(Repeat steps
3
. and
4
. two or three times.)
5.
Tighten the back focus locking screws by turning it clockwise
(
). (2 locations)