JVC TM-1011GU Instruction Manual - Page 13

7 BLUE CUTOFF Adjusts the blue cut-off point. • MIN O MAX (in 155 grades) 7 RED CUTOFF Adjusts the red cut-off point. • MIN O MAX (in 155 grades) SIZE/POSI. ADJ. Adjusts the size and position of the picture. 7 H. SIZE Adjusts the horizontal screen size. • -20 O 00 O +20 (*) -: Reduces the screen size horizontally. +: Enlarges the screen size horizontally. * You can adjust this item with in the range between 00 and +20 during the under-scan mode. 7 H. POSITION Adjusts the horizontal screen position. • -20 O 00 O +20 -: Moves the screen to the left. +: Moves the screen to the right. 7 V. SIZE Adjusts the vertical screen size. • -20 O 00 O +20 -: Reduces the screen size vertically. +: Enlarges the screen size vertically. 7 V. POSITION Adjusts the vertical screen position. • -10 O 00 O +10 -: Moves the screen down. +: Moves the screen up. DISTORTION ADJ. Compensates the picture distortion. Also compensates the picture tilt which is caused by geomagnetic influence. 7 PARALLELOGRAM Compensates the parallelogram picture distortion. • -20 O 00 O +20 -: Moves the upper side of the picture to the right, and the lower side to the left. +: Moves the upper side of the picture to the left, and the lower side to the right. 7 TRAPEZOID Compensates the trapezoid picture distortion. • -20 O 00 O +20 -: Enlarges the upper side of the picture. +: Reduces the upper side of the picture. 7 ROTATION Compensates a picture tilt. • -31 O 00 O +31 -: Turns the picture clockwise. +: Turns the picture counterclockwise. STATUS DISPLAY Sets the item related to turning on/off the status display. 7 STATUS DISPLAY Sets the status display. • AUTO/MANUAL/OFF ☞ "About the status display" on page 5 CONTROL LOCK Prohibits altering the monitor operations except turning the monitor on/off and deactivating this function. • ON/OFF NOTES: • When "CONTROL LOCK" is set to "ON," " Control lock on!" appears on the screen if you try to operate the monitor. • Operating the monitor by the external control is available if this function is activated. all reset Resets all the settings you have made to factory-preset values. • Adjustments made by using the front panel buttons will also be reset. 1. Move the MENU/VOLUME control to / to select "all reset," then move it to . Confirmation message is displayed. 2. To initialize, move the MENU/VOLUME control to . • To cancel the initialization, press the MENU/ VOLUME control. 13