JVC TM-1011GU Instruction Manual - Page 4

Controls and Features 7 Front Panel 1 23 4 567 8 9 pq 1 Tally lamp This lamp is controlled by the tally function of the MAKE/TRIGGER terminal. ☞ "How to Use the MAKE/TRIGGER Terminal" on pages 14 and 15 • You can set the lamp color to red or green. ☞ "TALLY SELECT" on page 12 2 CHROMA ( )/PHASE ( ) button Activates the Chroma (picture color density) adjustment mode or the Phase (picture hue) adjustment mode. Each time you press the button, the adjustment modes change. To adjust the value, move the MENU/VOLUME control (4) to / . NOTES: • CHROMA is not adjustable when the B/W (50 Hz/60 Hz) signal is input. • PHASE is not adjustable when the PAL signal or the B/W (50 Hz/60 Hz) signal is input. 3 CONTRAST ( )/BRIGHT ( ) button Activates the picture contrast adjustment mode or picture brightness adjustment mode. Each time you press the button, the adjustment modes change. To adjust the value, move the MENU/VOLUME control (4) to / . 4 MENU/VOLUME control • Adjusts the volume level by moving the control to / . • Displays or closes a menu screen by pushing in the control. • Turns off/on the sound each time moving the control to when no menu screen is displayed. While a menu screen is displayed, selects or adjusts the menu items by moving the control to / / / . ☞ "Basic Menu Operations" on pages 8 and 9 To display the SET-UP MENU: Press the CHROMA/PHASE button (2) while moving the MENU/VOLUME control to . 4