JVC TM-1011GU Instruction Manual - Page 16

Troubleshooting Solutions to common problems related to your monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems No power supply No picture with the power on No sound with the power on Wrong color Unnatural picture Shaking picture Irregular color Points to be checked Is the AC or DC power plug loose or disconnected? When using the DC power supply, is the battery charged? Is the AC or DC switch turned off? Is the signal cable disconnected? Is the power of the connected component on? Is the signal being output from the connected component? Is the input selected correctly? Is the input signal adapted to the monitor's specification? Are any of the self-check indicators flashing? Is the audio signal being output from the connected component? Is the volume level set to minimum or the sound is turned off? Is the audio cable disconnected? Has the picture adjustment been changed? Has the white balance setting been changed? Is the BLUE CHECK function activated? Has "CONTRAST" or "BRIGHT" been changed? Is the monitor close to a motor, transformer or any other device generating a strong magnetic field? (a fan, fluorescent light, laser printer, another monitor, etc.) Is the monitor placed or moved close to a speaker or any other magnetic device? Has the position of the monitor been changed with the power on? Measures (Remedy) Firmly insert the power plug. Charge the battery or replace it with the one charged. (Refer to the instructions of the battery.) Turn the AC or DC switch on. Connect the signal cable firmly. Turn on the power of the connected component and set the output correctly. Select the correct input with the INPUT SELECT buttons. Check if the input signal format is acceptable to the monitor. Follow the procedures in "Self-check Indications." Turn on the power of the connected component and set the output correctly. Adjust the volume level or turn on the sound using the MENU/VOLUME control. Connect the audio cable firmly. Set each picture adjustment to the standard (00) value. Or, perform "reset" in "PICTURE SUB ADJ." to set each item of picture adjustment to the standard value. Perform "reset" in "COLOR TEMP./BAL." to set each item to the standard value. Press the BLUE CHECK button on the front panel repeatedly to return the screen to normal. Adjust CONTRAST or BRIGHT by using the front panel buttons. Or, adjust "CONTRAST" or "BRIGHT" in "PICTURE SUB ADJ." in SET-UP MENU. Move the monitor away from the device until the picture stops shaking. Connect the power plug to another AC outlet away from the former one. Move the device away from the monitor. Reference pages - - 6, 7 6, 7 - 5 18 17 - 4 6, 7 4, 12 12, 13 5 4, 12 - - 16