JVC TM-1011GU Instruction Manual - Page 15
Operation, Functions controlled by the MAKE/TRIGGER Terminal, Turns on/off COLOR OFF
View all JVC TM-1011GU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Functions controlled by the MAKE/TRIGGER Terminal Display INP. A INP. B CO. OFF ASPECT TALLY TA. SEL STATUS Functions to be controlled Changes the input to INPUT A Changes the input to INPUT B Turns on/off COLOR OFF Changes ASPECT Controls the tally lamp Selects the color of the tally lamp Turns on/off the status display Opening Invalid Invalid Off 4:3 Off Green Off Short-circuiting *1 Valid Valid On (Monochrome screen) *2 16:9 On *3 Red On *1 The TRIG. (trigger) system switches each function by short-circuiting for approx. 1 second. *2 When selecting the TRIG. (trigger) system, these functions cannot be controlled if no signal is input. *3 Tally lamp Control and External control (the 7th pin terminal) can be controlled by the MAKE (make contact) system even when you select the "TRIG." (trigger) system. Operation 1. Short-circuit the 7th pin terminal (External control) to the 8th pin terminal (GND) so that the monitor can be controlled by the external control. 2. When selecting the "MAKE" (make contact) system, operate each function by short-circuiting the corresponding pin terminal to the 8th pin terminal (GND) or opening it. When selecting the "TRIG." (trigger) system, operate each function by Pulse control, that is short-circuiting the corresponding pin terminal to the 8th pin terminal (GND) for about 1 second. NOTES: • When controlling INP. A or INP. B, only one terminal must be short-circuited. (Other terminals must be opened.) • When selecting the "TRIG." (trigger) system, you can operate only one function at a time. Operate the functions one by one. 15