JVC TM-1650SDU TM-1650SDU monitor instruction manual (358KB) - Page 12

HOW TO INITIALIZE THE SETTING SCREEN DISPLAY AND SELECTIONS IN THE RESET MODE You can set and screen items, picture adjustment items and the volume level to their factory-set (initial) values. 1. Press the Power switch to set the unit to STAND BY ( ) mode. RESET screen RESET Are you sure ? "Yes" then "No" then or POWER ON STAND BY 2. While pressing both MENU button and PHASE ( ) button, press the Power switch to turn the power ON ( ). PHASE MENU POWER The RESET screen is displayed. * The screen automatically disappears when no operation ON is performed after about 5 minutes. STAND BY Note: ● The RESET screen will not be displayed if the MENU or PHASE buttons are pressed for a very short time. Keep pressing them until the display screen appears. 3. Setting ⅷ Initialization is required. CONTRAST Press the CONTRAST ( ) button. * Initialization is completed, and the RESET screen disappears. ⅷ Initialization is not required. - + VOLUME/SELECT Press the VOLUME/SELECT [+] or [-] button. * Initialization is aborted, and the RESET screen disappears. Volume Picture adjustment screen Initial settings screen Sorts Functions (Items) Initialization (setting) SHARPNESS COLOR TEMP. COLOR SYSTEM ASPECT RATIO RGB/COMPONENT COMPO. LEVEL BLUE CHECK 00 6500 AUTO 4-3 RGB 00 OFF H. POSITION 00 V. POSITION 00 WHITE BALANCE R. CUT OFF 00 G. CUT OFF 00 B. CUT OFF 00 R. DRIVE 00 B. DRIVE 00 CONTROL LOCK OFF STATUS DISPLAY ON INPUT REMOTE OFF ASPECT REMOTE OFF PHASE 00 CHROMA 00 CONTRAST 00 BRIGHT 00 VOLUME 20 12