JVC TM-1650SDU TM-1650SDU monitor instruction manual (358KB) - Page 13

BASIC CONNECTION EXAMPLE Notes: • Before connecting your system, make sure that all units are turned off. • The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting. • Each pair of input (IN) and output (OUT) terminals are bridge-connected. • If you're not connecting any equipment to a bridged output (OUT) terminal, be sure not to connect any other cables to the bridged output (OUT) terminal as this will cause the terminating resistance switch to open (auto terminate function). • When making a bridge connection, connect the input (IN) and output (OUT) terminals on the monitor to separate video components. (For example, if both terminals are connected to the same VCR, resonance may occur except during playback. This is caused by the same video signal "looping" between the VCRs, and is not a malfunction.) • Select the video input (INPUT A (VIDEO), INPUT B (Y/C) or INPUT RGB/COMPO./SDI) with the INPUT SELECT buttons on the front panel. • The ASPECT RATIO or INPUT A/B settings can be controlled via the REMOTE terminal by setting ASPECT REMOTE or INPUT REMOTE in the screen to valid. (Refer to pages 10 and 11.) Ⅵ VIDEO A Connection Example (Select Input A (VIDEO)) Video Camera Video (Video signal cable) Video Monitor Audio (Audio signal cable) VCR Ⅵ VIDEO B (VIDEO) Connection Example (Select Input B (VIDEO)) A IN IN VIDEO B IN OUT Y/G RGB / COMPO. RGB SYNC A IN AUDIO B IN RGB / COMPO. IN / SDI REMOTE INPUT A/B OUT Video (Video signal cable) OUT Video (Video signal cable) Y/C B-Y /B R-Y /R OUT Audio (Audio signal cable) OUT Audio (Audio signal cable) OUT ASPECT VCR Video Monitor Video Camera Video (Video signal cable) VCR Video Monitor Audio (Audio signal cable) VCR External control switch open circuit (open) RCA pin closed circuit (short) External control functions External control switch Open circuit Closed circuit (open) (short) INPUT A/B INPUT A INPUT B REMOTE (Remote cable) Video Monitor REMOTE (Remote cable) : Signal Flow External control switch RCA pin open circuit (open) closed circuit (short) External control functions External control switch Open circuit Closed circuit (open) (short) ASPECT RATIO 4-3 (4:3) 16-9 (16:9) 13