JVC TMH-150CGU Instruction Manual - Page 14

ENGLISH How to Use SET-UP MENU PICTURE SUB ADJ. H. POSITION : 00 V. POSITION : 00 WHITE BALANCE CONTROL LOCK : OFF STATUS DISPLAY : ON REMOTE SYSTEM : MAKE INPUT REMOTE : A-D EXIT Function and display of the button varies depending on the selected item. Buttons Displays Functions fi ∞ Selects the items in forward rotation. % 5 Selects the items in reverse rotation. VOLUME/ + Increases the value (up to the maximum). SELECT(+) 3 Selects the setting (value) in forward rotation. VOLUME/ - Decreases the value (up to the minimum). SELECT(-) 2 Selects the setting (value) in reverse rotation. MENU EXIT Returns to or exits from SET-UP MENU. CHROMA CONTRAST VOLUME/SELECT PHASE BRIGHT MENU When setting "WHITE BALANCE": Buttons Displays Functions R•B Selects the color to adjust the drive level. fi R•G•B Selects the color to adjust the cut-off point. % DISP Turns on/off the on screen display. VOLUME/ CUTO Adjusts the cut-off point. SELECT(+) + Increases the value (up to the maximum). VOLUME/ DRV Adjusts the drive level. SELECT(-) - Decreases the value (up to the minimum). MENU EXIT Returns to SET-UP MENU. 7 Function, Contents, and the Adjustment Range of Each Item PICTURE SUB ADJ. H. POSITION The standard value ("00") of the picture adjustment is initially set at the factory. You can adjust the standard value as your initial setting. • Select "PICTURE SUB ADJ." on SET-UP MENU, then press the VOLUME/SELECT (+) button to display the setting menu illustrated on the right. CONTRAST : 00 BRIGHT : 00 CHROMA : 00 PHASE : 00 EXIT NOTES: • You can adjust the items in "PICTURE SUB ADJ." separately for each video input. Select the video input you want to adjust beforehand. • Only "CONTRAST" and "BRIGHT" appear on the screen when the RGB signal is input. When the signal with PAL color system is input, "PHASE" does not appear. Adjusts the horizontal position of the screen. NOTE: You can adjust "H. POSITION" separately for each video input. Select the video input you want to adjust beforehand. • -05 " 00 " +05 -: Moves the screen to the left. +: Moves the screen to the right. V. POSITION Adjusts the vertical position of the screen. NOTE: You can adjust "V. POSITION" separately for each video input. Select the video input you want to adjust beforehand. • -05 " 00 " +05 -: Moves the screen downward. +: Moves the screen upward. 7CONTRAST • -10 " 00 " +10 7BRIGHT • -10 " 00 " +10 7CHROMA • -10 " 00 " +10 7PHASE • -10 " 00 " +10 13