JVC TMH-150CGU Instruction Manual - Page 9
SDI Input Card IF-C21SDG/IF-C51SDG
UPC - 046838010682
View all JVC TMH-150CGU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Controls and Features (cont'd) Input Card (option) (cont'd) 7 SDI Input Card (IF-C21SDG/IF-C51SDG) The EMBEDDED AUDIO signal is acceptable. (IF-C51SDG is also equipped with an AUDIO LEVEL METER function.) SWITCHED OUT IN1 E.AUDIO SDI IN2 1 2 3 1 SWITCHED OUT terminal Output (OUT) terminal for the re-clocked signal. The input signal from the input terminal currently selected (IN1 or IN2) is re-clocked and output from this terminal. NOTES: • No signal is output from the SWITCHED OUT terminal when the main power is turned off. • Even when the input signal is switched from the SDI Input Card, the SWITCHED OUT terminal still outputs the IN1 or IN2 re-clocked signal which is selected last time. The re-clocked signal from IN1 is output from the SWITCHED OUT terminal when the monitor is in stand-by mode. AUDIO MONITOR OUT 4 (This illustration is IF-C21SDG.) 7 Acceptable signal formats when installed on this monitor: 525/60i, 625/50i, EMBEDDED AUDIO (8ch) 2 D1 SDI and EMBEDDED AUDIO signal input terminals Accepts the SMPTE259M D1 SDI signal. Also accepts the EMBEDDED AUDIO signal whose sampling frequency is 48 kHz and the channel range is 1 to 8. To select IN1: Press the INPUT SELECT C button. To select IN2: Press the INPUT SELECT D button. \ To select the EMBEDDED AUDIO channels and to set the AUDIO LEVEL METER function (only for IF-C51SDG), set the DIP switches on the input card correctly. For details, refer to the instruction manual supplied with the input card. 3 Connection terminal Attach to the connection terminal of the input card slot on the monitor. 4 Audio signal output terminal Outputs the analog audio signal after decoding the EMBEDDED AUDIO signal. The input signal from the input terminal currently selected (IN1 or IN2) is output from this terminal. \ This terminal outputs the same audio signal as the audio sound output from the speaker. NOTES: • No signal is output from the audio signal output terminal when the monitor is in stand- by mode. • Even when the input signal is switched from the SDI Input Card, this terminal still outputs the audio signal from the IN1 or IN2 which is selected last time. IMPORTANT • Do not use any other input card than the input cards listed on pages 7 and 8. Using other input cards may cause malfunction or damage the monitor. Such malfunction or damage caused by using other input cards cannot be warranted. • If any equipment is not connected to a bridged output (OUT) terminal, be sure not to connect any cords to the bridged output (OUT) terminal. Connecting a cord to a bridged output (OUT) terminal will cause the terminating resistance switch to open (auto terminate function). • When making a bridge connection, connect the input (IN) and output (OUT) terminals on the monitor to separate video components. (For example, if both the input (IN) and output (OUT) terminals are connected to the same VCR, resonance may occur except during playback. This is caused by that the same video signal circulates between the VCR and the monitor. This is not a malfunction.) 8