JVC TMH-150CGU Instruction Manual - Page 15

How to Use SET-UP MENU (cont'd) WHITE BALANCE Adjusts the white balance. NOTE: You can adjust the items in "WHITE BALANCE" separately for each color temperature (6500 or 9300). Select the color temperature you want to adjust beforehand. Cut-off adjustment • Select "WHITE BALANCE" on SET-UP MENU, then press the VOLUME/ SELECT (+) button to display the setting display R. CUTOFF: 00 R•G•B DISP EXIT for the cut-off adjustment. (When "R. CUTOFF" is selected.) 7R. CUTOFF Adjusts the cut-off point of the red signal. • -20 " 00 " +20 7G. CUTOFF Adjusts the cut-off point of the green signal. • -20 " 00 " +20 7B. CUTOFF Adjusts the cut-off point of the blue signal. • -20 " 00 " +20 Drive level adjustment • Select "WHITE BALANCE" on SET-UP MENU, then press the VOLUME/SELECT (-) button to display the setting display for the drive level adjustment. R. DRIVE: 00 R•B DISP EXIT (When "R. DRIVE" is selected.) 7R. DRIVE Adjusts the drive level of the red signal. • -20 " 00 " +20 7B. DRIVE Adjusts the drive level of the blue signal. • -20 " 00 " +20 CONTROL LOCK Prohibits the monitor operations except turning on/off the monitor and adjusting volume. The menu operations are also prohibited. • ON: Activates this function. • OFF: Deactivates this function. NOTES: • When "CONTROL LOCK" is set to "ON," "CONTROL LOCK ON!" appears on the screen if you try to operate the monitor. • You can deactivate this function on SET-UP MENU when "CONTROL LOCK" is set to "ON." STATUS DISPLAY If "COLOR SYSTEM" is set to "AUTO," you can display the color system (NTSC or PAL) of the current input signal when turning on the monitor or when changing the input. • ON: Displays the color system (NTSC or PAL) of the current input signal. • OFF: Does not display the color system (NTSC or PAL) of the current input signal. NOTE: The color system does not appear on the screen when the component signal, RGB signal, or black-and-white signal is input. REMOTE SYSTEM Selects the method of the external control connected to the REMOTE terminal. \ For details, see page 15. • MAKE (make contact system) • TRG. (trigger system) INPUT REMOTE Sets how to change the input when operating the monitor by the external control. \ For details, see page 15. • A-D • A/B NOTE: "INPUT REMOTE" appears on the screen only when "REMOTE SYSTEM" is set to "MAKE." NOTE: You can turn off the on screen display during the adjustment of the white balance by pressing the % button. 14