JVC VN-C655U Instructions - Page 37

Symptoms Camera control cannot be performed or settings acquired are incorrect for a span of about 30 seconds upon turning on the power Video images cannot be displayed smoothly Unable to focus properly Forgotten the password upon enabling the password protection feature Camera turns to another direction upon initializing Unable to select position Video images are not displayed PAN/TILT action of camera is slow Zoom does not move to "0" Remedial Actions • About 30 seconds are required for initialization of the camera to complete upon turning on the power. To perform camera control or acquire settings, do so by allowing an interval of 30 seconds after turning on the power. • Live images may appear in slow motion or loss of frames may occur when PC specifications or network bandwidth is inadequate. This is not a malfunction. • The auto-focus function may not be able focus properly when shooting a dark or empty area. In this case, adjust focus manually. • In principle, there may be difficulty in adjusting focus on an object with horizontal stripes. • Focus may not be sharp in some cases when adjusting manually at the TELE end. This is not a malfunction. • Repair services will be required to undo the password protection function. Please consult the dealer from which the product is purchased. Please also note that you may be asked to produce identification cards for security reasons. • The home position is not registered. Register the home position. • Positions are not registered. Register positions accordingly. • Is the unit connected to a 18V DC power supply? Check the connection. • Is the Pan/Tilt speed setting set to a small value? Set this to a larger value. • Is the maximum Digital Zoom value set to a value other than x10? Zoom to "0" is possible when this is set to x10. 37