JVC XV-S502SL Instruction Manual - Page 61

Additional information English Troubleshooting What appears to be a malfunction may not always be serious. Please go through the following list before requesting service. POWER Symptom Power does not come on. Possible cause Power plug is not inserted securely. Remedy Plug in securely. OPERATION Symptom The remote control unit does not work. The TV/VIDEO - CANCEL, 5/∞/2/3 or numeric buttons do not work. Operation is not possible. When using the TITLE/GROUP button to select a title during DVD VIDEO playback, appears on the TV screen and the title cannot be selected. Possible cause Too far from the unit. Remedy More closer to the unit. The tip of the remote control unit is not pointed in the right direction. Point the infrared light- emitting window toward the remote sensor on the front panel. (See page 10.) Batteries are exhausted. Replace the batteries with new ones. Battery polarity is incorrect. Take out the batteries and insert them again in the correct direction. The remote control unit is not set for operating your TV. Set the remote control unit for operating your TV. (See page 12.) The TV - DVD switch is not correctly set. To control the unit, set the TV - DVD switch to "DVD". To control your TV, set the TV DVD switch to "TV". (See page 11.) Microcomputer malfunction due to lightning or static electricity. Turn off the power and unplug the power cord, then connect the power cord again. Moisture condensation caused by a sudden Turn off the power, then turn it on a few change of temperature or humidity. hours later. The disc does not allow the operation. Or a non-playable disc is loaded. Check and replace the disc. (See page 4.) The disc does not allow the operation because of disc contents. Try to press 7 and select a title using the numeric buttons on the remote control Additional information 59