Jensen VM9021TS Instruction Manual - Page 26

releasing the button to increase the rate from "2X" to "4X", "8X", and "20X". Continue pressing the >> or /\ button to fast reverse. Scanning Press the SCN button (34) on the remote control to play the first ten seconds of each chapter. Press SCN again to stop the scan function and play the current chapter. Selecting 2-Channel and 6-Channel Audio Playback 2-Channel Audio (Down Mix) Support for CD, SD Card and DVD Linear pulse code modulation (LPCM) and pulse code modulation (PCM) support is available for CD, SD Card and DVD discs when 2-channel audio is selected. 6- Channel Audio Support for CD, SD Card and DVD Pro-Logic II is available for decoding analog or digital 2channel down mixed sources. Dolby Digital is available for decoding digital bit-stream sources. NOTE: 2-channel audio support is available for AM/FM tuner, TV tuner, Aux Input, XM, iPod and Navigation only. 6-channel audio support is available for DVD/CD/CD-R and SD card. Table 10: Speaker Output Options Speaker Setup Front Rear Center SubSpkr Spkr Spkr Woofer 2CH mode X X Play 2-channel (down X X X X mix) audio in 6-chan- nel mode with Pro- Logic II "ON" Play 6-channel audio X X X X in 6-channel mode with Dolby Digital "ON" Goto Search During DVD or VCD playback, perform the following steps to use the GOTO feature to access a specific location on a disc: 1. Press the GOTO button (21) on remote control to enter "GO TO" mode. 2. Press the >> or buttons (8, 9) on the joystick to select a category (highlighted in blue). • For DVD mode, you can choose Time or Title/Chapter search. DVD Search Time - Go to specific time in current title Title/Chapter - Go to specific time in a chapter • For VCD mode, press the GOTO button to choose between Track Search, Disc Search and Exit. VCD Track Search Time - Go to specific time in the current track Track - Go to specific track VCD Disc Search Time - Go to specific time on disc Track - Go to specific track 3. Enter a time into the field using the numeric keypad (29) on the remote control. 4. Press the >/|| button (18) on the remote control or the ENTER (joystick) button (5) to go to the specified location on the disc. 5. Press the GOTO button again to exit. Direct Chapter / Track Selection During DVD, VCD and CD playback, you can use the numeric keypad on the remote control (29) to access a track directly. Viewing an Alternate Picture Angle (DVD Only) Some DVDs contain scenes that have been shot simultaneously from different angles. For discs recorded with multiple angles, press the ANGLE button (13) on the remote control to toggle available angles of the on-screen image. Zooming Press the ZOOM button (23) on the remote control to enlarge and pan through the video image using the following options: "Q1", "Q2", "Q3", and "OFF". VM9021TS Multi-Language Discs (DVD Only) Changing Audio Language If you are watching a disc recorded in multiple languages, press the AUDIO button (5) on the remote control to choose a language. Changing Subtitle Language If you are watching a disc recorded in multiple languages with subtitles, press the SUBTITLE button (9) on the remote control to choose the language in which you would like the subtitles to appear. NOTE: During VCD playback, press the AUDIO button (5) on the remote control to choose between Left Channel, Right Channel, and Stereo. PBC (Play Back Control - VCD Only) For VCDs with play back functionality, play back control (PBC) provides additional controls for VCD playback. Press the MENU button (1) on the remote control to toggle the PBC function "On"/"Off". Once PBC is on, playback starts from track one of the play list. NOTE: When PBC is activated, fast forward, slow playback, and previous/next track are available. Repeat and direct track selection are not available. When PBC is activated, selecting random, scan, or search playback automatically deactivates PBC. Playback Information During DVD and VCD playback, press the INFO button (10) on the remote control to display playback information on the screen, including the media playing and current playback time. DVD Playback Information The following information is displayed at the bottom of the screen during DVD playback: • T : 5/8 - "5 / 8" indicates the fifth of 8 titles on the DVD is currently playing. • C : 2/16 - "2 / 16" indicates that the second of 16 titles on the DVD is currently playing. • 00:41:28 - "00:41:28" indicates the playback time of the current title. 22