Jensen VM9213 Operation Manual - Page 5

VM9213 INTRODUCTION Congratulations on your purchase of the Jensen VM9213 Mobile Multimedia Receiver. It's a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9213 installed by a reputable installation shop. Features DVD • Aspect Ratio - Full and Normal • Fast Forward - 2X, 4X, 8X and 20X • Slow Motion - 1/2, 1/4, 1/6 and 1/7 • Play, Pause, Stop, Next Chapter and Previous Chapter CD / MP3 / WMA • ID3 Tag Compatible • Directory Search (MP3 / WMA Only) • Direct Track Access via Remote Control • Burn up to 1500 MP3 and WMA Files onto a DVD+R / RW • Audible Forward / Reverse Track Search (CD-DA Only) • Random, Repeat and Intro • Play, Pause, Stop, Next Track and Previous Track Tuner • USA, A. America 1, Arabia, China, S. America 2, Europe, Korea Frequency Spacing • 30 Station Presets (18 FM / 12 AM) • Auto Stereo / Mono • Auto Store Chassis • 1.0 DIN (Import / ISO-DIN Mountable) • Motorized Flip-Out / Flip-Up LCD Screen • 8 Character / Segment Type Secondary LCD Display • 7" TFT Active Matrix LCD with Anti-Glare Coating • 336,960 Sub Pixels (1440W X 234H) • Pixel Pitch - 0.321W X 0.370H • Screen Tilt / Angle Adjustment • Beep Tone Confirmation (On-OFF Option) • Heat Management System - Forced Air Cooling to keep the chip sets operating at nominal temperatures General • Navigation Ready (NAV102 Only) • Bluetooth Ready (with purchase of BTM10) providing hands-free profile for safety / convenience and A2DP profile for streaming music from a PDA / PMP • 44-Key Infrared Remote Control • Composite Video Output for an Additional Screen • Two Audio / Video Auxiliary Inputs for Game Console, Camcorder, Navigation, etc. • Three-Band Tone control (Bass, Mid and Treble) with Eight Preset EQ Curves • Front, Rear and Subwoofer Line Output • Programmable Volume Control • Rear Camera Input (Normal and Mirror Image View) • Touch Screen Calibration Mode • 100-Ohm Preamp Line Output - All Audio Channels • 2VRMS Line Output - All Channels • Rotary Encoder Audio Control • RCA Audio/Video Input • SWC Interface - Compatible with PAC adapter SWI-PS Steering Wheel Control Interface, sold separately Optional Equipment • NAV102 The VM9213 is "navigation ready." Before accessing any navigation features, you must purchase and install the navigation module (NAV102). All installation and operating instructions will be included with the navigation module. Once the navigation module is connected and operating properly, the NAV source mode will become active. While the navigation module is not installed, the NAV option appears gray, indicating the function is not available. • BTM10 Before you can connect to a Bluetooth enabled device, you must purchase and install the Jensen BTM10. • Bluetooth Phone See "Bluetooth Operation" on page 19. • Rear Camera The VM9213 is "camera ready." Before accessing any camera features, you must purchase and install a rear video camera. Once the rear camera is connected and operating properly, the CAMERA source mode will become active. While the camera is not installed, the CAMERA option appears gray, indicating the function is not available. WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera or navigation) never use the video display function while driving the vehicle. This is a violation of federal law. WARNING! Never disassemble or adjust the unit. WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water. WARNING! Never use irregular discs. WARNING! To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor. WARNING! Using an improper fuse may cause damage to the unit and result in a fire. WARNING! The monitor employs an automatic motorized mechanism. To prevent damage to the core mechanism, please do not push, pull or swivel the monitor manually. 1