Jensen VM9311TS Instruction Manual - Page 16
Operating Instructions - used remotes
UPC - 043258303219
View all Jensen VM9311TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
OPERATING INSTRUCTIONS Power On / Off Press the /MUTE button (7) to turn the unit on. The buttons on the front of the unit light up and "WELCOME" appears briefly in the LCD panel (23), followed by the current mode status. If the TFT screen is open, only the current mode status is displayed. You can also turn on the unit by pressing the OPEN button (1) and opening the TFT screen. Press and hold the /MUTE button (7) on the front panel or the POWER button (4) on the remote to power off the unit.The monitor is drawn back into the main compartment and the LCD screen displays "BYE BYE". Audible Beep Confirmation An audible beep tone confirms each function selection. The beep tone can be disabled through the System Setup menu. Mute Press the /MUTE button (7) on the front panel or the MUTE button (3) on the remote to mute the volume from the unit. Press the MUTE button again to restore the volume. "MUTE" is displayed on the LCD monitor. Adjusting the volume or using any of the audio setup features cancels the mute function. Playing Source Selection Press the SRC button (15) on the front panel or the SRC button (8) on the remote to change between available playing sources in the following order: TUNER, DVD, AUX IN, iPod and XM. The playing mode is displayed on the TFT and LCD screens. AUX IN Mode An external peripheral device can be connected to this unit via RCA output and "AUX-IN". Volume Adjustment To increase or decrease the volume level, turn the ROTARY ENCODER (6) on the front panel or press the VOL+/ VOLbuttons (15, 16) on remote control. When the volume level reaches "0" or "40", a beep sounds, indicating that the adjustment limit has been reached. The volume ranges from "0" to "40". The LCD or TFT screen displays the volume level for 3 seconds. Programmable Turn-On Volume This feature allows the user to select a turn-on volume setting regardless of the volume setting prior to turning the unit off. To program a specific volume level, push and hold the VOL/ LO/DX knob (6) while the yellow volume bar is displayed on the screen. The unit will beep two times to confirm your turnon volume setting. Audio Control Menu The Audio Control feature allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on the type of vehicle and its measurements. To get the best possible sound quality from your new system, be sure to adjust the settings for the speakers as well. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer. Accessing the Audio Control Menu Press the VOL/LO/DX knob (6) on the front panel once to display the "AUDIO" menu. Selecting an Audio Feature for Adjustment Continuously press the VOL/LO/DX knob (6) on the front panel, or press the (>>)/(