Jensen VM9311TS Instruction Manual - Page 19

15

VM9311TS

TUNER OPERATION

Tuner TFT Display

1.

Current Radio Band Indicator

2.

Radio Frequency Indicator

3.

Clock

4.

Stereo Broadcasting Indicator

5.

Strong Local Signal Broadcasting Indicator

6.

Preset Radio Stations: Touch to recall preset stations or

touch and hold to store a station

7.

Playing Mode

8.

User Defined Equalizer Level

9.

Loud Setting Indicator

10.

Current Preset Station Indicator

11.

|<<

: Touch to seek backward

12.

>>|

: Touch to seek forward

13.

<<: Touch to tune backward one step

14.

>>

: Touch to tune forward one step

15.

BAND

: Touch to change between AM/FM bands

16.

AS

: Touch to automatically store stations

17.

Touch this area to return to the MAIN MENU

Switch to Radio Tuner source

Press the

SRC

button (15) on the front panel or remote

control (8) to switch to the TUNER source.

Select FM/AM Band

Touch the

BAND

button (15) on the screen, or press the

BAND

button on the unit (14) or remote control (20) to

change between the following bands: FM1, FM2, FM3, AM1,

and AM2.

Seek Tuning

Press the

>>|

button (19) on remote control or the

>

button on

the joystick (17) to seek the next station higher.

Press the

|<<

button (17) on the remote control or the

<

button on the joystick (16) to seek the next station lower.

Manual Tuning

Press the

/\

or

V

buttons (18, 19) on the joystick to increase

or decrease the tuning frequency one step.

Using Preset Stations

Six numbered preset buttons store and recall stations for

each band. All six stored stations (P1-P6) for the current

band appear on the screen.

Storing a Station

1.

Select a band (if needed), then select a station.

2.

Touch and hold an on-screen preset button (6) for three

seconds. The preset number appears at the top of the

screen.

Recalling a Station

1.

Select a band (if needed).

2.

Touch an on-screen preset button (6) to select the

corresponding stored station.

NOTE: You can also use the numered buttons on

the control panel to store and recall preset

stations.

Auto Store (AS)/Preview Scan

Automatic Storing of Preset Stations

To select six strong stations and store them in the current

band:

1.

Select a band (if needed).

2.

Press the

AS

button (26) on the control panel or touch

AS

(16) on screen for 2 seconds to activate the Auto

Store function.

The new stations replace stations already stored in that band.

Preview Scan

Scan the AM or FM band for a preview of available stations in

your particular area. Press the play/pause button on the

remote control once (short press) or push in on the joystick

once (short press). Press again to stop preview scan.

Local Radio Station Seeking (LOC)

When the Local function is on, only radio stations with a

strong radio signal are played. To activate the Local function

in AM/FM tuner mode,

press and hold

the

VOL/LO/DX

knob

(6) on the front panel while the yellow volume bar IS NOT

visible. Press

VOL/LO/DX

again to turn Local off. When the

Local function is active, “LOC” appears on the screen and a

green indicator is illuminated.

P1

4

1

9

10

2

5

7

8

3

6

BAND

AS

11

12

13

14

15

16

17

PRESETS

Source:

Jensen VM9311TS Instruction Manual - Page 19

Tuner Operation - knob

Page 19 highlights