Kenmore 6703 Use and Care Guide - Page 14

Choose your exhaust installation type Recommended exhaust installations Typical installations vent the dryer from the rear of the dryer. Other installations are possible. B D. O A A B A. Standard rear offset exhaust installation B. Rear exhaust installation to left or right side Z A. Dryer B. Elbow C. Wall D. Exhaust hood E. Clamps E Rigid metal or flexible metal vent G. Vent length necessary to connect elbows H. Exhaust outlet Optional exhaust installations Venting systems come in many varieties. Select the type best for your installation. Fire Hazard Cover unused exhaust hole with the following kit: 8212563 Contact your local dealer. Failure to follow these instructions can result in death, fire, electrical shock, or serious injury. C D C. Bottom exhaust installation D. Over-the-top installation (also available with one offset elbow) NOTE: The following kits for alternate installations are available for purchase. For further information, please call 1-800-4-MY-HOME ®(1-800-469-4663). • Rear exhaust installation to left or right side: Part Number 8212504 • Bottom exhaust installation: Part Number 8212503 • Over-the-Top installation: Part Number 26-49900 Special provisions for mobile home installations The exhaust vent must be securely fastened to a noncombustible portion of the mobile home structure and must not terminate beneath the mobile home. Terminate the exhaust vent outside. This dryer can be converted to exhaust out the bottom. If you prefer, you may contact your local dealer to have the dryer converted. This dryer can also be exhausted from the rear to either the right or left side. Optional kits for these exhaust installations are needed, Refer to the manufacturer's instructions for kit installation instructions. 14