Kenwood DDX276BT Instruction Manual - Page 66

Troubleshooting Specifications Echo or noise occurs.  Adjust the microphone unit position.  Adjust the echo volume or noise reduction volume. (Page 35) The unit does not respond when you try to copy the phone book to the unit.  You may have tried to copy the same entries (as stored) to the unit. "Connection Error" appears.  The device is registered but the connection has failed. Connect the registered device. (Page 34) "Please Wait..." appears.  The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again (or reset the unit). "No Voice Device" appears.  The connected mobile phone does not have a voice recognition system. "No Data" appears.  No phone book data is contained in the connected Bluetooth phone. "Initialize Error" appears.  The unit has failed to initialize the Bluetooth module. Try the operation again. "Dial Error" appears.  Dialing has failed. Try the operation again. "Hung Up Error" appears.  The call has not ended yet. Park your car, and use the connected mobile phone to end the call. "Pick Up Error" appears.  The unit has failed to receive a call. The Bluetooth connection between the Bluetooth device and the unit is unstable.  Delete the unused registered Bluetooth device from the unit. (Page 35) Monitor section Picture Size (W × H) Display System Drive System Number of Pixels Effective Pixels Pixel Arrangement Back Lighting 6.2 inches (diagonal) wide 137.5 mm × 77.2 mm (5-7/16" × 3-1/16") Transparent TN LCD panel TFT active matrix system 1 152 000 (800H × 480V × RGB) 99.99% RGB striped arrangement LED USB interface section USB Standard Compatible Device File System Maximum Power Supply Current D/A Converter Audio Decoder Video Decoder USB 2.0 Full Speed/High Speed Mass Storage Class FAT 16/32 DC 5 V 1.5 A 24 bit MP3/WMA/AAC (.aac/.m4a)/ WAV/FLAC DivX*/MPEG1/MPEG2/JPEG * Only for DDX419BT. 64 ENGLISH