Kenwood DNX571HD User Manual - Page 110
DSP select, You can select whether using DSP Digital, Signal Processor System. - bypass
View all Kenwood DNX571HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Speaker location setup 1 In the Car Type screen, touch [Location]. Speaker Location screen appears. 2 Select the speaker locations using [3]. Return to the Top page Controlling Audio DSP select You can select whether using DSP (Digital Signal Processor) System. 1 Touch [Bypass] or [Through] of [DSP Select] in the Audio SETUP screen. Front Speaker Select the location from "Door"/ "On Dash"/ "Under Dash". Rear Speaker Select the location from "Door"/ "Rear Deck", "2nd Row"/ "3rd Row" (Minivan, Minivan (Long)). Bypass There is no effect by DSP. Through There is an effect by DSP. NOTE • When the mode is set to [Bypass], DSP System cannot be adjusted. 109
109
Return to the Top page
Controlling Audio
Speaker location setup
1
In the Car Type screen, touch [Location].
Speaker Location screen appears.
2
Select the speaker locations using [
3
].
Front Speaker
Select the location from “Door”/ “On Dash”/
“Under Dash”.
Rear Speaker
Select the location from “Door”/ “Rear Deck”,
“2nd Row”/ “3rd Row” (Minivan, Minivan
(Long)).
DSP select
You can select whether using DSP (Digital
Signal Processor) System.
1
Touch [Bypass] or [Through] of [DSP
Select] in the Audio SETUP screen.
Bypass
There is no effect by DSP.
Through
There is an effect by DSP.
NOTE
• When the mode is set to [Bypass], DSP System
cannot be adjusted.