Kenwood DPX540BT Instruction manual - Page 27
Function], Mic Gain, Level -10, Level +10, Level -4, Nr Level, Level -5, Level +5, Level 0, Echo
View all Kenwood DPX540BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
BLUETOOTH® Improve the voice quality While talking on the phone... 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit. To return to the previous setting item, press . MIC GAIN NR LEVEL ECHO CANCEL Default: XX LEVEL -10 to LEVEL +10 (LEVEL -4): The sensitivity of the microphone increases as the number increased. LEVEL -5 to LEVEL +5 (LEVEL 0): Adjust the noise reduction level until the least noise is being heard during a phone conversation. LEVEL -5 to LEVEL +5 (LEVEL 0): Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation. Make the settings for receiving a call 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit. Default: XX SETTINGS AUTO ANSWER 1 to 30: The unit answers incoming call automatically in the selected time (in seconds). ; OFF: Cancels. BATT/SIGNAL* AUTO: Shows the strength of the battery and signal when the unit detects a Bluetooth device and the Bluetooth device is connected. ; OFF: Cancels. * Functionality depends on the type of the phone used. Make a call You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature. 1 Press to enter Bluetooth mode. "(First device name)" appears. • If two Bluetooth phones are connected, press again to switch to another phone. "(Second device name)" appears. 2 Turn the volume knob to select an item ( 24), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press and hold to exit. To return to the previous setting item, press . To return to the previous setting item, press . ENGLISH 23