Kenwood DPX540BT Instruction manual - Page 42
How to remove the unit, Installing the unit in-dash mounting, When installing without the mounting
View all Kenwood DPX540BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
INSTALLATION/CONNECTION (For / / ) Installing the unit (in-dash mounting) Do the required wiring. ( 39) Dashboard of your car Bend the appropriate tabs to hold the mounting sleeve firmly in place. When installing without the mounting sleeve Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied). * For / / : Remove the mounting sleeve and trim plate from the unit before installing. Installing in Toyota cars Install onto the car brackets using screws (F) or (G) (supplied). Use the mounting holes ( ) or ( ) that fit the car brackets. Then, install the supplied trim plate (C). Do the required wiring. ( 39) Car bracket Dashboard of your car Use only the specified screws. Using wrong screws might damage the unit. (For / / ) How to remove the unit 1 Fit the catch pin on the extraction keys into the holes on both sides of the trim plate, then pull it out. 2 Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the illustration. 38 ENGLISH