Kenwood DRV-410 Instruction Manual - Page 10
How to Wire - dashboard camera
View all Kenwood DRV-410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
How to Wire Connecting the cigarette lighter plug cord (accessory) Connect the drive recorder and power cord of the cigarette lighter plug cord. When disconnecting the power cord, disconnect it while pressing the hook of the connector. Cord length (4 m) Drive recorder Connect the cigarette lighter plug to the cigarette lighter socket. Power cord for Dashboard Camera (accessory) CAUTION Before performing the connection work, first check that the engine key is removed and then be sure to disconnect the negative terminal of the battery to prevent a short accident. Connect the Dashboard Camera and power cord. Dashboard Camera Cord length (3.5 m) Ignition key switch Fuse Accessory power supply ACC Accessory cord (Red) Connect to a power supply that can be turned on and off with the switch. Fuse (2 A) Main fuse BATT Battery cord (Yellow) Connect to a power supply with a voltage always applied regardless of whether or not the engine key is on or off at a point after the power has passed through the main fuse. Battery 10 Ground cord (Black) Connect to a metal part of the vehicle (part of the chassis with an electrical GND connection to the negative side of the power supply).