Kenwood KDC-MP632U Instruction Manual - Page 30
Switching preout, B.M.S., Management, System, Built-in Amp Setting, B.M.S. Frequency Offset
UPC - 019048167293
View all Kenwood KDC-MP632U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Menu system Function of the KDC-MP632U In Standby mode Switching preout Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control.) "SWPRE R" "SWPRE SW" Rear preout. Subwoofer preout. Function of the KDC-X590IKDC-MP632U In Standby mode Built-in Amp Setting Controlling the built-in amplifier. Turning OFF this control enhances the preout quality. Function of the KDC-X590 Other than Standby mode B.M.S. (Bass Management System) Adjust the bass boost level of the external amplifier using the main unit. 'IBMS FLT" "BMS +6" "BMS + 12" "BMS + 18" Bass boost level is fiat. Bass boost level is low (+6dB). Bass boost level is mid (+12dB). Bass boost level is high (+18dB). ~ ~ • Refer to the catalog or instruction manual for power amplifiers that can be controlled from this unit. • For amplifiers, there are the models you can set from Flat to +18 dB, and the models you can set from Flat to +12 dB. When an amplifier that can only be set to +12 is connected to the unit, "BMS +18" will not work correctly even if it is selected. "AMPOW "AMP OFF" The built-in amplifier activates. The built-in amplifier deactivates. Function of the KDC-X590IKDC-MP632U Other than Standby model When the Dual Zone System is ON Dual Zone System Setting Setting the Front channel and Rear channel sound in the Dual Zone System. Function of the KDC-X590 Other than Standby mode B.M.S. Frequency Offset Setting the central frequency, boosted by 8.M.S. "BMSF NML" "BMSF LOW" Boost with the normal central frequency. Drop the normal central frequency 20%. "Z0NE2 R" "Z0NE2 F" Sub source (Auxiliary input source) is to be rear channel. Sub source (Auxiliary input source) is to be front channel. 30 I English