Kenwood KDC-MP632U Instruction Manual - Page 4
Safe, ty'precautions, AWARNING, ACAUTION - faceplate
UPC - 019048167293
View all Kenwood KDC-MP632U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Safe,ty'precautions AWARNING To p.revent injury or fire, take the following precautions: • To preventa short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Mounting andwiri·rig this product requires skills and experienc:e. For safety's sake, leave the' mou ntingand .wi ri ng' work to professiona Is. Attach thepanel·while.youare on the . vehicle The panel lock arm appears when the panel is removed. Therefore, the panel must be attached while the electrical system of the car is operating. ACAUTION To prevent damage to· the machine, take the following precautions: • Make sure to ground the unit to a negative 12V DC power supply. • Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. • Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. • To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers. • Do not subject the faceplate to excessive shock, as· it is a piece of precision equipment. • When replacing a fuse, only use a new fuse with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. • Do not apply excessive force to the open faceplate or place objects on it. Doing so wi(1 cause damage or breakdown. • Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the ulllit. Do Not LO'ad 3-in.. CDs i'n the CD slot If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. About CD players/disc changer:s connected to this unit Kenwood disc :changers! CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers! CD players. Note that any Kenwood disc changers/COplayers released in 1997 or earlier and disc changers made by other makers cannot be connected tothis unit. Connecting unsupported disc changers!CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. The functions you can use and the information that can be displayed may differ depending on the models being connected. ~ • You can damage both your unit and the CD changer if you connectthem incorrectly. LX-bus connection The LX AMP and the sensor unit must be connected one at a time. Lens Fogging When you turnonthe car heater in cold weather, dew or condensation may form onthe lens in the CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. The "AAC· logo is trademark of Dolby Laboratories. NOTE This Class B digital apparatus complies with Canadian ICES-003.