Kenwood KDC-X492 Instruction Manual - Page 12

Menu Operation Menu System Set up the following functions; Display Setting Setting overview Source "SECURITY SET"/ "SECURITY CLR" Refer to page 12 Sets/Resets security code "CLOCK Refer to Sets the clock. ADJUST" page 13 "DISPLAY" ON*/OFF Turns off the display when no - operation is performed. "DIMMER" AUTO*/OFF Dims the display in conjunction *1,2,3 with the light switch of the vehicle. "DIMMER"*4 ON/OFF* Adjusts the brightness of - the display according to the surrounding illumination. source to which the item is displayed. : Can be set in other than standby state. : Can be set in standby state. : Can be set while Audio file source of CD/USB (excluding iPod). : Can be set during FM reception. : Can be set during Satellite radio source. : Can be set while accessing AUX source. : Can be set while HD Radio source. - : Can be set during all sources. 1 Enter Menu mode Press the [M.JOG] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob towards up or down. 3 Set the menu item Push the Control knob towards right or left. "DOT LINE" ON*/OFF Specifies whether to display the red dotted line on the display. "SWPRE"*3,4 REAR*/ Sets the preout output. SUB-W "AMP"*1,2 ON*/OFF Turns on/off the built-in amplifier. "AMS Refer to Controls the connected LX - CONTROL"*1 page 13 amplifier. "ZONE2"*1,2,3 REAR*/ FRONT Specifies the destination of AUX input sound when the Dual Zone function is turned on. "SUPREME" ON*/OFF Turns ON/OFF the Supreme function. 4 Exit Menu mode Press the [M.JOG] button. ⁄ • Refer to the respective page for information on how to set the items with reference page number. • "ZONE2" is displayed when "2ZONE" in (page 7) is set to "ON. • Refer to the (page 16) for the details of the menu items. • Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF. "CRSC" OFF/ON* Switches to Monaural to decrease noise when reception is poor. "NAME SET" Refer to Sets the display when switched page 14 to AUX source. Activating Security Code "SCROLL" AUTO*/ Specifies whether the text is - MANUAL scrolled automatically. "RECEIVE Refer to Sets the receive mode of HR radio. MODE" page 14 "ESN" - Displays the Electronic Serial Number of satellite radio. "AUX" OFF/ON1*/ Sets whether to display AUX ON2 during source selection. "CD READ" 1*/2 Sets the CD read mode. "DEMO Refer to Specifies whether to enable - MODE" page 14 demonstration. ⁄ • You can set the Security Code with a 4 digit number of your choice. • The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up. 1 Select Security Code item during Menu mode Select the "SECURITY SET" display. For how to select menu items, refer to (page 12). 2 Enter Security Code mode *Factory setting *1 Function of KDC-X492. *2 Function of KDC-MP438U. *3 Function of KDC-MP408U. *4 Function of KDC-MP338. Displayed item is depending on currently selected source. The mark in Source column shows the Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed. 3 Select the digits to enter Push the Control knob towards right or left. 4 Select the Security Code numbers Push the Control knob towards up or down. 12 | KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338