Kenwood KDC-X492 Instruction Manual - Page 17

Disconnection Massage>, and , press [AUTO] button for at least 1 second. Moreover, some displays are different from the description of KCA-BT100 Instruction Manual. Displays of KCA-BT100 Instruction Actual displays on this unit Manual "DISCONCT" "HF DISCONCT" "CONNECT" "HF CONNECT" "PHN-DEL" "DEVICE DEL" "P-STATUS" "DVC STATUS" "BT-CON Y" "HF CONNECT Y" "T-CON N" "HF CONNECT N" : Displays the bluetooth connection status. This indicator turns on when a cell-phone is connected to this unit. : Displays the signal strength of cell-phone. : Displays the battery level of cell-phone. listening to output from external unit. This prevents the noise when no external unit is connected to AUX terminal. OFF: Disables the selection of AUX source. Set to OFF when not using the AUX terminal. • ZONE2 (Dual Zone) Set the destination (front speaker "FRONT" or rear speaker "REAR") of the sub source (AUX IN) when the Dual Zone function is turned on. • DISPLAY If this unit is not operated at least 5 seconds with "OFF" selected, the display turns off. During a setup mode, the display will not turn off even if 5 seconds lapse. • AMP Selecting "OFF" turns off the built-in amplifier. Turning off the built-in amplifier improves the quality of the sound from Preout. Menu Glossary • SWPRE (Switching Preout) Switches the preout between rear output ("REAR") and subwoofer output ("SUB-W"). • SUPREME Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz). Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range. • CD READ Sets the method for reading CD. When unable to play special format CD, set this function to "2" to force playing. Note that some music CD may be unplayable even when set to "2". In addition, audio files cannot be played when set to "2". Normally, keep this set to "1". 1 : Automatically distinguishes between audio file disc and music CD when playing disc. 2 : Forces playing as music CD. • AUX When this is set to ON, AUX source can be selected. ON1: Outputs the sound of external unit connected to the AUX terminal when switched to AUX source. ON2: Activates the attenuator function when switched to AUX source. Turn off the attenuator function when English | 17