Kenwood KDC-X492 Instruction Manual - Page 13

5 Repeat steps 3 and 4, and complete the Security Code. 6 Confirm the Security Code Press the Control knob for at least 3 second. When "RE-ENTER" is displayed, "CODE" is also displayed. 7 Do the step 3 through 6 operation, and reenter the Security Code. "APPROVED" is displayed. The Security Code function activates. ⁄ • If you enter the wrong Code in steps 3 through 5, repeat from step 3. • When the Security Code function is activated, "SECURITY SET" changes to "SECURITY CLR". • To deactivate the Security Code function, see the next section . 8 Exit Security Code mode Press the [M.JOG] button. Entering Security Code The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed. 1 Turn the power ON. 2 Do the step 3 through 6 operation, and enter the Security Code. "APPROVED" is displayed. Deactivating Security Code Deactivating the Security Code function. 1 Select Security Code item during Menu mode Select the "SECURITY CLR" display. For how to select menu items, refer to (page 12). 2 Enter Security Code mode Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed. 3 Select the digits to enter Push the Control knob towards right or left. 4 Select the Security Code numbers Push the Control knob towards up or down. 5 Repeat steps 3 and 4, and complete the Security Code. 6 Press the Control knob for at least 3 second. "CLEAR" is displayed. The Security Code function deactivates. 7 Exit Security Code mode Press the [M.JOG] button. ⁄ • If the entered security code is incorrect, "ERROR" is displayed. Enter a correct security code. Manual Clock Adjustment 1 Select Clock Adjustment item during Menu mode Select the "CLOCK ADJUST" display. For how to select menu items, refer to (page 12). 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the time Push the control knob towards up or down to adjust the hours and right or left to adjust the minutes. 4 Exit Clock adjustment mode Press the [M.JOG] button. Function of KDC-X492 When LX AMP unit connecting AMP Control You can control the LX AMP connected to the unit. 1 Select AMP Control item during Menu mode Select the "AMS CONTROL" display. For how to select menu items, refer to (page 12). 2 Enter AMP Control mode Press the Control knob for at least 1 second. 3 Select the AMP Control item for adjustment Push the Control knob towards up or down. ⁄ • For the details on the AMP Control item, see the Instruction manual attached to the LX AMP. 4 Adjust the AMP Control item Push the Control knob towards right or left. 5 Exit AMP Control mode Press the [M.JOG] button. English | 13