Kenwood KDC-X492 Instruction Manual - Page 7
Audio Setup, Speaker Setting - remote control
View all Kenwood KDC-X492 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Audio Setup You can set Sound system , such as follows; Adjustment Item Display Range Front High Pass Filter* "HPF" Through/40*1/60*1/80/100/120/ 150/180/220*1 Hz Rear High Pass Filter* "HPR" Through/40*1/60*1/80/100/120/ 150/180/220*1 Hz Low Pass Filter "LPF SW" 50*1/60*1,2/80/100*1/120/160*3/ Through Hz Subwoofer Phase* "PHASE" Reverse (180°)/ Normal (0°) Volume offset "V-OFFSET" -8 - ±0 (AUX: -8- +8) Loudness* "LOUDNESS" OFF/ON Dual Zone System* "2ZONE" OFF/ON *Function of KDC-X492/KDC-MP438U/KDC-MP408U. *1KDC-X492 only. *2KDC-MP438U/KDC-MP408U only. *3KDC-MP338 only. ⁄ • Volume offset: Sets each source's volume as a difference from the basic volume. • Loudness: Compensates for low and high tones during low volume. (Only the low tone is compensated for when the tuner is selected as a source.) • Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. - Set up the channel of sub source by "ZONE2" of (page 12). - Select Main source by [SRC] button. - Adjust the volume of Front channel by Control knob. - Adjust the volume of Rear channel by (page 6) or [5]/[∞] button on the remote control (page 15). - The Audio Control has no effect on sub source. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Setup mode Press the Control knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the Control knob. 4 Adjust the Audio setup item Turn the Control knob. 5 Exit Audio Setup mode Press the Control knob for at least 1 second. Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Speaker type OFF For 5 & 4 in. speaker For 6 & 6x9 in. speaker For the OEM speaker Display "SP SEL OFF" "SP SEL 5/4" "SP SEL 6*9/6" "SP SEL OEM" 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Speaker Setting mode Press the Control knob. 3 Select the Speaker type Turn the Control knob. 4 Exit Speaker Setting mode Press the Control knob. English | 7