Kenwood KDC-X696 Instruction Manual - Page 12
Selecting App & iPod Control Mode, Adjust [SETTINGS] mode settings
View all Kenwood KDC-X696 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Selecting App & iPod Control Mode Press number button 5 (iPod) repeatedly to make a selection. MODE ON : Control iPod from the iPod *. "APP&iPod MODE" appears on the display. MODE OFF: Control iPod from the unit. * You can still control play/pause, select files, fast- forward/reverse files from the unit. Adjust [SETTINGS] mode settings While listening to an iPod or KENWOOD Music Editor media ... 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to select [SKIP SEARCH], then press to enter. 4 Turn the volume knob to make a selection, then press to confirm. 0.5% (initial)/ 1%/ 5%/ 10% : Sets the ratio of skip when searching for a song in Music Search mode. (Holding 4 / ¢ skips songs at 10% regardless of the setting made.) 5 Hold to finish the procedure. Handling discs ■■Do not touch the recording surface of the disc. ■■Do not stick tape etc. on the disc, or use a disc with tape stuck on it. ■■Do not use any accessories for the disc. ■■Clean the disk by moving the cloth outward from the center of the disc. Discs that cannot be used ■■This unit can only play the CDs with: ■■A disc that is not round. ■■A disc with coloring on the recording surface or a disc that is dirty. ■■You cannot play a Recordable/ReWritable About the Audio file ■■Playable Audio files: MP3 (.mp3), WMA (.wma), AAC-LC (.m4a) ■■Playable disc media: CD-R/RW/ROM ■■Playable disc file formats: ISO 9660 Level 1/2, Joliet, Romeo, Long file name. ■■Playable USB devices: USB mass storage class ■■Playable USB device file systems: FAT16, FAT32 12 English ■■Clean the disc with a dry silicon or soft cloth. Do not use any solvents. ■■When removing a disc from this unit, pull it out horizontally. ■■If the center hole or outside rim of a disc has burrs, remove them before inserting a disc. disc that has not been finalized. (For the finalization process, refer to the instruction manual that came with your disc writing software or your disc recorder.) ■■3-inch CD cannot be used. An attempt to insert using an adapter can cause malfunction. Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device. ■■Detailed information and notes about the playable audio files are stated in an online manual on the following site: www.kenwood.com/cs/ce/audiofile/