Kenwood KDC-X696 Instruction Manual - Page 17
PIN CODE EDIT], About the Cell-Phone - bluetooth
View all Kenwood KDC-X696 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
6 Press the volume knob to set up the Bluetooth device. ■■"✱H✱A (device name)": The selected Bluetooth device is busy. ■■"-H-A (device name)": The selected Bluetooth device is on standby. ■■"(blank) (device name)": The Bluetooth device is deselected. ■■If two cell-phones or an audio player have already been selected, deselect one device before selecting a new Bluetooth device. • "H" (HFP) or "A" (A2DP) indicates the corresponding profile. 7 Press to exit pairing mode. Deleting the registered Bluetooth device 2 "(device name)" or "DEVICE FULL" is displayed. 3 Turn the volume knob to select a Bluetooth device name. 4 Press and hold the volume knob to delete the selected cell-phone. "DELETE" is displayed. 5 Turn the volume knob to select "YES", then press to confirm. "COMPLETED" is displayed. 6 Press to exit easy pairing mode. Registering from Bluetooth devices (Pairing) 1 Press SRC to turn on the power. 2 Start registering this unit by operating the Bluetooth device. By operating the Bluetooth device, register the hands-free unit or audio unit (pairing). Select "KENWOOD BT CD/R-5T1" from the list of found units. 3 Input the PIN code ("0000") in the Bluetooth device. Check that registration is complete on the Bluetooth device. PIN code is set to "0000" as the default. You can change this code. Refer to [PIN CODE EDIT] under (page 23). 4 By operating the Bluetooth device, start hands-free connection. ■■If there are 5 or more Bluetooth devices registered, you cannot register a new Bluetooth device. About the Cell-Phone ■■Version: Bluetooth Standard Ver. 2.1+EDR ■■Profile: HFP (Hands Free Profile) SPP (Serial Port Profile) OPP (Object Push Profile) PBAP (Phone book Access Profile) A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) For the cell-phones verified for compatibility, access the following URL: www.kenwood.com/cs/ce/bt/ ■■The units supporting the Bluetooth function have been certified for conformity with the Bluetooth Standard following the procedure prescribed by Bluetooth SIG. However, it may be impossible for such units to communicate with your cellphone depending on its type. English 17