Kenwood KDC-X696 Instruction Manual - Page 30
Troubleshooting - reset
View all Kenwood KDC-X696 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installing the Microphone Unit (KDC-X696 only) 1 Check the installation position of the microphone H. 2 Remove oil and other dirt from the H installation surface. 3 Install the microphone. 4 Wire the microphone cable up to the hands-free box with it secured at several positions using tape or the like. ■■Install the microphone as far away as possible from the cell-phone. Peel off the release coated paper of double-face adhesive tape to secure the microphone on the place shown above. Fix a cable with a commercial item of tape. Turn the microphone toward the driver. Troubleshooting Symptom Sound cannot be heard. "PROTECT" appears and no operations can be done. The unit does not work at all. Radio reception is poor. / Static noise while listening to the radio. "IN" flashes. CD-R/CD-RW cannot be played back and tracks cannot be skipped. Disc sound is sometimes interrupted. "NA FILE" appears. "NO DISC" appears. "TOC ERROR" appears. "ERROR 99" appears. Remedy/Cause Adjust the volume to the optimum level. / Check the cords and connections. Check to be sure the terminals of the speaker leads are covered with insulating tape properly, then reset the unit. If "PROTECT" does not disappear, consult your nearest service center. Reset the unit. Connect the antenna firmly. / Pull the antenna out all the way. The CD player is not operating properly. Reinsert the disc properly. If the condition did not improve, turn off the unit and consult your nearest service center. Insert a finalized CD-R/CD-RW (finalize with the component which you used for recording). Stop playback while driving on rough roads. / Change the disc. / Check the cords and connections. The unit is playing an unsupported audio file. Insert a playable disc into the loading slot. The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try another disc instead. The unit is malfunctioning for some reason. Press the reset button on the unit. If the "ERROR 99" code does not disappear, consult your nearest service center. 30 English