Kenwood KDC-X998 Instruction Manual - Page 13
Preparations, 3. How to select the item
View all Kenwood KDC-X998 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
3-2. Preparations Cancel the Demonstration mode Cancel the Demonstration mode when you use the unit for the first time after installation. 1 Press [Control] knob to cancel the Demonstration mode when the message "To cancel DEMO Press the volume knob" appears (approx. 15 seconds). 2 Turn [Control] knob to select the "YES", and then press [Control] knob. The Demonstration mode can also be canceled in the Function Setting mode. Refer to (page 65). Detaching/ Attaching the faceplate 3-3. How to select the item For how to select setting items such as a function setting item, see the following example: Example: Setting the Date format of the display 1 Press [Control] knob. "Function" appears and enters the Function setting mode. 2 Select the Date Mode function item ! • Remove the faceplate at once after pressing the Release button; otherwise it can fall down due to vibration. • The faceplate is a precision component of the unit and can be damaged by shocks or jolts. • Keep the faceplate in its case while detached. • Do not place the faceplate (and case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Turn [Control] knob to select "Settings", and then press [Control] knob. Next, turn [Control] knob to select "Clock&Date", and then press [Control] knob. Finally, turn [Control] knob to select "Date Mode", and then press [Control] knob. To cancel and return to the previous item, press [1/6]. 3 Turn [Control] knob to select a format (7 types), and then press [Control] knob. Returns to the previous item. 4 Press and hold [1/6]. Exits the Function setting mode. About the description in this manual • In this manual, operations performed in steps 2 and 3 are described as follows: 2. Select "Settings" > "Clock&Date" > "Date Mode" using [Control] knob. 3. Select a format (7 types) using [Control] knob. English | 13