Kenwood KDC-X998 Instruction Manual - Page 20

Speaker setting, 5. X'Over setting

Page 20 highlights

DSP settings (KDC-X998, KDC-BT958HD) 5-4. Speaker setting The speaker X'Over is automatically set when the position and size of each speaker are selected from the following items. 1 Press [SRC] and select a source other than Standby ("STANDBY") using [Control] knob. Refer to (page 14). 2 Press [Control] knob. Enters the Function setting mode. 3 Select "Audio Control" > "Pro Setup" > "Speaker Setting" using [Control] knob. For how to use [Control] knob, refer to (page 13). 4 Select a speaker type using [Control] knob. Speaker type Setting item Setting value "Front" Front speaker "Door", "On Dash", "Under Dash" location "SIZE" Front speaker size KDC-X998 "O.E.M.", "3 1/2in", "4in", "4 3/4in", "5in", "6 1/2in", "6 3/4in", "7in", "4x6", "5x7", "6x8", "6x9", "7x10" KDC-BT958HD "Small", "Medium", "Large" "TW" Tweeter size "None", "Small", "Medium", "Large" "Rear" Rear speaker "Door", "Rear Deck" location ("2nd Row", "3rd Row"[1]) "SIZE" Rear speaker size KDC-X998 "None", "O.E.M.", "3 1/2in", "4in", "4 3/4in", "5in", "6 1/2in", "6 3/4in", "7in", "4x6", "5x7", "6x8", "6x9", "7x10" "SubWoofer" "SIZE" KDC-BT958HD "None", "Small", "Medium", "Large" Speaker Size Subwoofer KDC-X998 "None", "6 1/2inch", "8inch", "10inch", "12inch", "15inch Over" KDC-BT958HD "None", "Small", "Large" (Colored text: Factory setting) [1] Value set when "Minivan" or "Minivan (Long)" is selected as described in (page 19). 5 Select a setting item using [Control] knob. 6 Select a setting value using [Control] knob. Exiting from the Function setting mode Press and hold [1/6]. 5-5. X'Over setting Fine adjusting the following setting values corresponding to the X'Over values set in the section (page 20). 1 Press [SRC] and select a source other than Standby ("STANDBY") using [Control] knob. Refer to (page 14). 2 Press [Control] knob. Enters the Function setting mode. 3 Select "Audio Control" > "Pro Setup" > "X'Over" using [Control] knob. For how to use [Control] knob, refer to (page 13). 4 Select a speaker type using [Control] knob. Speaker type Setting item Setting value "Front" "FC" Front high pass filter KDC-X998 Through, 30, 40, 50, 60, 70, 80, 90, 100, 120, 150, 180, 220, 250 Hz KDC-BT958HD Through, 40, 60, 70, 80, 100, 120, 150, 180, 220 Hz "SLOPE"[1][2] Front high pass slope -6, -12, -18, -24 dB/Oct "GAIN" Front gain -8 ,-7, -6, -5, -4, -3, -2, -1, 0 dB "Rear" "FC" Rear high pass filter KDC-X998 Through, 30, 40, 50, 60, 70, 80, 90, 100, 120, 150, 180, 220, 250 Hz KDC-BT958HD Through, 40, 60, 70, 80, 100, 120, 150, 180, 220 Hz "SLOPE"[1][2] Rear high pass slope -6, -12, -18, -24 dB/Oct "GAIN" "SubWoofer" "FC" Rear Gain -8, -7, -6, -5, -4, -3, -2, -1, 0 dB Subwoofer low pass filter KDC-X998 30, 40, 50, 60, 70, 80, 90, 100, 120, 150, 180, 220, 250, Through Hz KDC-BT958HD 40, 60, 70, 80, 100, 120, 150, 180, 220, Through Hz "SLOPE"[1][2] Subwoofer slope -6, -12, -18, -24 dB/Oct "GAIN" Subwoofer gain -8 ,-7, -6, -5, -4, -3, -2, -1, 0 dB "PHASE" Subwoofer phase "REV" (180°)/ "NML" (0°) 20 | KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

20
|
KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
DSP settings (KDC-X998, KDC-BT958HD)
5-4. Speaker setting
The speaker X’Over is automatically set when the
position and size of each speaker are selected from
the following items.
±
Press [SRC] and select a source other than
Standby (“STANDBY”) using [Control] knob.
Refer to
<Source selection> (page 14)
.
²
Press [Control] knob.
Enters the Function setting mode.
³
Select “Audio Control”
>
“Pro Setup”
>
“Speaker Setting” using [Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 13)
.
´
Select a speaker type using [Control] knob.
Speaker type
Setting item
Setting value
“Front”
Front speaker
location
Door
”, “On Dash”, “Under Dash”
“SIZE”
Front speaker size
KDC-X998
“O.E.M.”, “3 1/2in”, “4in”, “4 3/4in”,
“5in”, “
6 1/2in
”, “6 3/4in”, “7in”,
“4x6”, “5x7”, “6x8”, “6x9”, “7x10”
KDC-BT958HD
“Small”, “
Medium
”, “Large”
“TW”
Tweeter size
“None”, “Small”, “
Medium
”, “Large”
“Rear”
Rear speaker
location
Door
”, “Rear Deck”
(“
2nd Row
”, “3rd Row”
[1]
)
“SIZE”
Rear speaker size
KDC-X998
“None”, “O.E.M.”, “3 1/2in”, “4in”, “4
3/4in”, “5in”, “
6 1/2in
”, “6 3/4in”,
“7in”, “4x6”, “5x7”, “6x8”, “6x9”,
“7x10”
KDC-BT958HD
“None”, “Small”, “
Medium
”, “Large”
“SubWoofer”
“SIZE”
Speaker Size Subwoofer
KDC-X998
“None”, “6 1/2inch”, “8inch”,
10inch
”, “12inch”, “15inch Over”
KDC-BT958HD
“None”, “Small”, “
Large
(
Colored text
: Factory setting)
[1]
Value set when “Minivan” or “Minivan (Long)” is selected
as described in
<5-3. Car type selection> (page 19)
.
µ
Select a setting item using [Control] knob.
Select a setting value using [Control] knob.
Exiting from the Function setting mode
Press and hold [
1
/
6
].
5-5. X’Over setting
Fine adjusting the following setting values
corresponding to the X’Over values set in the
section
<5-4. Speaker setting> (page 20)
.
±
Press [SRC] and select a source other than
Standby (“STANDBY”) using [Control] knob.
Refer to
<Source selection> (page 14)
.
²
Press [Control] knob.
Enters the Function setting mode.
³
Select “Audio Control”
>
“Pro Setup”
>
“X’Over” using [Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 13)
.
´
Select a speaker type using [Control] knob.
Speaker type
Setting item
Setting value
“Front”
“FC”
Front high pass filter
KDC-X998
Through
, 30, 40, 50, 60, 70, 80, 90,
100, 120, 150, 180, 220, 250 Hz
KDC-BT958HD
Through
, 40, 60, 70, 80, 100, 120,
150, 180, 220 Hz
“SLOPE”
[1][2]
Front high pass slope
-6,
-12
, -18, -24 dB/Oct
“GAIN”
Front gain
-8 ,-7, -6, -5, -4, -3, -2, -1,
0
dB
“Rear”
“FC”
Rear high pass filter
KDC-X998
Through
, 30, 40, 50, 60, 70, 80, 90,
100, 120, 150, 180, 220, 250 Hz
KDC-BT958HD
Through
, 40, 60, 70, 80, 100, 120,
150, 180, 220 Hz
“SLOPE”
[1][2]
Rear high pass slope
-6,
-12
, -18, -24 dB/Oct
“GAIN”
Rear Gain
-8, -7, -6, -5, -4, -3, -2, -1,
0
dB
“SubWoofer”
“FC”
Subwoofer low pass filter
KDC-X998
30, 40, 50, 60, 70, 80, 90, 100, 120,
150, 180, 220, 250,
Through
Hz
KDC-BT958HD
40, 60, 70, 80, 100, 120, 150, 180,
220,
Through
Hz
“SLOPE”
[1][2]
Subwoofer slope
-6,
-12
, -18, -24 dB/Oct
“GAIN”
Subwoofer gain
-8 ,-7, -6, -5, -4, -3, -2, -1,
0
dB
“PHASE”
Subwoofer phase
“REV” (180°)/ “
NML
” (0°)