Kenwood KDC-X998 Instruction Manual - Page 22
Select Audio Control
View all Kenwood KDC-X998 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
DSP settings (KDC-X998, KDC-BT958HD) 5-7. Delay time control Adjusting fine tuning of the speaker position compensation value specified at (page 19). Preparation for setting • If you specify the distance from the center of the currently set listening position to every speaker, the delay time will be automatically computed and set. 1. Determine the center of the currently set listening position as the reference point (• in the illustration shown below). 2. Measure the distances from the reference point to the speakers. 3. Calculate the differences between the distance of the furthest speaker and other speakers. 4. Input the differences calculated in step 3 for individual speakers. 5. Adjust gain for individual speakers. A sound image will be shifted to the speaker with increased gain. Example: When "Front" is selected as the listening position ( (page 21)). 4 Select a speaker using [Control] knob. Speaker Display Front Left speaker "FrontL" Front Right speaker "FrontR" Rear Left speaker "RearL" Rear Right speaker "RearR" Subwoofer Left "SW L" Subwoofer Right "SW R" (Colored text: Factory setting) Range 0 - 20.01 feet 0 - 20.01 feet 0 - 20.01 feet 0 - 20.01 feet 0 - 20.01 feet 0 - 20.01 feet 5 Select a value using [Control] knob. Exiting from the Function setting mode Press and hold [1/6]. Front L +3.2 feet 1.7 feet Front R Rear L 2.6 feet Rear R 4.9 feet +2.3 feet +0 feet SW L SW R 1 Press [SRC] and select a source other than Standby ("STANDBY") using [Control] knob. Refer to (page 14). 2 Press [Control] knob. Enters the Function setting mode. 3 Select "Audio Control" > "Pro Setup" > "DTA Settings" > "DTA" using [Control] knob. For how to use [Control] knob, refer to (page 13). 22 | KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U