Kenwood KMM-BT318U Instructional Manual - Page 11
Radio
View all Kenwood KMM-BT318U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
HD Radio™ tuner (for ) RADIO (for / / ) 3 Press the volume knob to display the information related to the message. 4 Press again to exit. • "NO LIST" appears when the list is empty. • This feature can store up to four messages in the list. • To clear the message list, set [FACTORY RESET] to [YES]. ( 5) Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit. To return to the previous setting item, press . Default: XX TUNER SETTING IF BAND AUTO: Increases the tuner selectivity to reduce interference noises from adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises from adjacent FM stations, but sound quality will not be degraded and the stereo effect will remain. AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels. • Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 4) RECEIVE MODE Sets the receive mode of the HD Radio receiver. AUTO: Automatically tunes to analog broadcast when there is no digital broadcast. ; DIGITAL: Tunes in to digital broadcast only. ; ANALOG: Tunes in to analog broadcast only. CLOCK TIME SYNC ON: Synchronizes the unit's time to the Radio Broadcast Data System station time. ; OFF: Cancels. Search for a station 1 Press repeatedly to select TUNER. 2 Press repeatedly (or press / on the remote control) to select FM1/FM2/FM3/AM. 3 Press S / T (or press S / on the remote control) to search for a station. • To change the searching method for S / T: Press repeatedly. AUTO1 : Automatically search for a station. AUTO2 : Search for a preset station. MANUAL : Manually search for a station. • To store a station: Press and hold one of the number buttons (1 to 6). • To select a stored station: Press one of the number buttons (1 to 6) (or press one of the number buttons (1 to 6) on the remote control). Direct Access Tuning (using the remote control) 1 Press DIRECT to enter Direct Access Tuning. 2 Press the number buttons to enter a frequency. 3 Press to search for a station. • To cancel, press or DIRECT. • If no operation is done for 10 seconds after step 2, Direct Access Tuning is automatically canceled. ENGLISH 7