Kenwood KMM-BT318U Instructional Manual - Page 22
BLUETOOTH - Mobile phone, Receive a call, Connect with a remote device by One-touch NFC - bluetooth pairing
View all Kenwood KMM-BT318U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
BLUETOOTH® Connect with a remote device by One-touch (NFC) (for / ) Near Field Communication (NFC) enables short-range wireless communication between the unit and remote devices such as smartphones. By holding an NFC-compatible remote device near to the N-Mark on the unit (volume knob), the unit and remote device proceed to complete pairing and established the BLUETOOTH connection automatically. 1 Activate the NFC function on the remote device. Refer to the instruction manual of the remote device for more information. 2 Hold the remote device near to the N-Mark on the unit (volume knob). The device vibrates when pairing is completed. • To disconnect, hold the remote device near to the N-Mark on the unit (volume knob) again. • This unit only can recognize and connect to one NFCcompatible device at a time. 18 ENGLISH BLUETOOTH - Mobile phone Receive a call When there is an incoming call: • ZONE 2 illuminates in green color and flashes. • The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 19) During a call: • ZONE 1 illuminates according to the settings made for [DISPLAY] ( 27) and ZONE 2 illuminates in green color. • If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected. The following operations may differ or not available depending on the connected phone. To First incoming call... Answer a call Reject a call End a call On the faceplate On the remote control Press or the volume knob or one of the number buttons (1 to 6). Press . Press . Press . Press . Press .